| Protection set M30 - Art.-Nr. 196302 M32 - Art.-Nr. 196301 The PTFE protection set M32 x 1.5 consists of an internally threaded cover, a Pg9-screwing for cable entry and a rubber gasket between the cover and the sensor. This protection cover serves as improvement to the degree of protection, against infiltration of liquids, for example in applications where the sensor is totally immersed in liquids. The resistance of the material still needs to be checked. The thread of the sensor has to be sealed, for example with PTFE sealing- tape. The protection cover has to be screwed totally up to the end, and then the Pg9-screw has to be fixed. Protection set, M30 suitable for KAS-70-26-A-M22-M30-PTFE or KAS-80-26-A-M22-M30-PTFE. M32 suitable for KAS-70-26-A-200-PTFE-1", KAS-80-26-A-200-PTFE-1", KAS-70-26-A-200-PTFE-1"-StEx-N or KAS-80-26-A-200-PTFE-1"-StEx-N |