Text version of the page

•Hydrocheck-B • •UNO •

Electronic building humidity indicator

Technical data

Differential pressure measuring instrument

Important features and technical data: Measuring range 0 to 100 digits •Handy quick-reading humidity detector in pocket size for instantaneous single or series measurements. Height 200 mm, width 35 mm x depth 35 mm, weight ca. 190 g•Ideal pre-test instrument for all CM instruments •Fully automatic calibration •No separate electrodes or cable necessary •Power supply: 9 V block battery or Ni-Cd accumulator (extra accessory) Many pressure measurements in heating applications, like gas flow pressure,nozzle pressure or chimney draught can be easily and quickly performed using the ecom-UNO. This small and handy instruments fits in every pocket. The integral magnet fixation provides with an easy fixation on metal surfaces, leaving herewith the user both hands free. The instrument is delivered with 2 current 1.5 V Mignon batteries which can easily be changed without any tools.•Small and handy thanks to pocket format•Automatic range switch •Ideal for burner and heating adjustment •Measurement of gas flow pressure and chimney pressure •4 switchable units: hPa/mbar, mmH2O, psi, mmHg •Integral magnet for fixation on metal surfaces •Powered via 2 current batteries 1.5 V AA (Mignon) Electronic indicator for building humidity with patented measurement principle acc. to the dielectric constant / high frequency , measurement principle. With LCD digital indication and flexible operating ball sensor for non-destructive humidity detection in building material every kind as well as for recognition of humidity distribution in walls, ceilings and floors. Measuring range:200 hPa2038 mm H2O2,9 psi150 mmHg

•Humidcheck •

Resolution:0,01 hPa0,1 mm H2O0,01 psi0,01 mmHg Overload:300 hPa3060 mm H2O4,35 psi225 mmHg Accuracy:+/- 1 % Surrounding temperature:0 °C ... 40 °C Important features and technical data: Stocking temperature:-20 °C ... 70 °C •Handy quick humidity analyser in pocket size for split-second single orseries measurements•Height 130 mm x width 40 mm x depth 21 mm, weight ca. 130 g •Fully automatic calibration •No separate electrodes or cable necessary •Power supply: 3 x round cells (CR2032)

Electronic wood and plaster humidity analyser

Battery:2 x 1,5 V AA (Mignon) Current consumption:20 mA Measuring range: 6 to 44% wood humidity resp. 0.2% to 2.% plaster humidity Ideal tool for on the spot check on building sites. Quick and reliable indi- cation of material humidity in wood and building material (walls). Very easy use - remove protective cap and plug the measuring electrodes in the material to be checked. The thin tips enable humidity detection in sawn timber, chip boards, veneers and wood fibres up to max. 25 mm thick- ness as well as in normal gypsum or mixed plasters. Dimensions:106 x 64 x 28 mmWeight:150 g

•GSK •

Gas leak detector

The gas leak detection head ecom-GSK is engineered for the quick andreliable identification of leakage sources at gas installations. Reverse to leak detection sprays which can swell and quickly seal again seals made out of hemp for example, the leakage search with the ecom-GSK is easy and operator-friendly.The instrument shows existing gas concentration on the display andwarns via optical and acoustical signal at a gas concentration higher than 100 ppm. Herewith also small leakages can be detected. The robust sensor head is connected to a flexible swan-neck, so thathardly accessible plant sections can easily be reached. The ecom-GSK can be operated with 2 micro-batteries. Optionally it can be powered by accumulators (nickel-cadmium or nickel-metal hydride). The latest will be recharged by a charging unit (option) while remaining in the instrument. Technical data

•SCANTEMP •

Infrared thermometer with thermocouple input and laser

Infrared measuring instruments measure any surface temperature. Thespecific advantage is the short response time ( 5000 ppm Power supply:2 batteries 1.5 V AAA (Micro) or2 accus 1.2 V AAA NiCd (nickel-cadmium) or2 accus 2 x 1.2 V AAA (nickel-metal hydride) Operation time with batteries:ca. 2 hours Warm-up time max.:3 minutes Tolerated operation temperature:-5 to 40(C Tolerated storage temperature:-25 to 40(C Tolerated surrounding humidity:20 to 80 % rHDimensions / Weight:Housing: 155 x 35 x 22mm, flex arm length: 165 mm. Weight: 160 g