| | | | | | | | | | | | | | | | | | | |
| | | |
| | | Compact. Accurate. Affordable. Bring the advantages of a complete infrared temperature measurement system to your process. GP - Sensor with Laser Sighting The GP Series is a versatile, two-piece temperature industrial monitoring system which combines a compact, value-priced monitor with an infrared sensing head. The GP system can be used with a choice of sensing heads allowing you to configure an infrared temperature monitoring system that best matches your application. If the sensor is located near the measurement target, or the target is large, a sensing head such as the MI or CI is appropriate. If the measurement spot is small, or the sensor must be located further from the target, the GPS with its 50:1 optics is required. And the attractive pricing means you can Install these sensors at multiple points along your process for enhanced monitoring coverage. | | |
| | | Fast Measurements | | |
| | | |
| | | Infrared thermometers measure the energy radiated from an object, without touching it. This measurement technique is important in applications where contact would damage or alter the surface, such as a sheet of plastic film, or contaminate the product, such as food processing. Unlike contact sensors, there is no delay while the infrared industrial thermometer reaches the correct temperature. This makes it ideal for measuring moving or discrete processes. The result is fast, accurate noncontact temperature measurement and tighter control of your process. | | |
| | | |
| | | Highlights: GP Sensor | | |
| | | |
| | | ■ Laser sighting available (GPS head) ■ Compact 1/8 DIN monitor with large four-digit display ■ Adjustable emissivity and T-ambient compensation ■ Adjustable dual setpoints and deadband for alarm outputs ■ Standard and close focus optics available ■ Accessories for cooling and air purging | | |
| | | |
| | | The laser sighted GPS sensing head provides 50:1 optics and 1% accuracy. | | |
| | | |
| | | CI - The Thermocouple Alternative When a low-maintenance solution to industrial thermocouples is required, consider the CI. The CI is a rugged, integrated unit with the same output impedance as a thermocouple. It functions accurately without offset errors when used in conjunction with the thermocouple break protection circuitry in most controllers, displays, and transmitters. Combine the CI with the GP monitor to add a display and power supply. The CI has a rugged stainless steel housing to ensure continuous, long-term performance, even in hostile environments. | | |
| | | |
| | | Highlights: CI Sensor | | |
| | | |
| | | ■ Ambient temperatures to 70°C without cooling ■ Accessories for cooling and air purging ■ Powered by 12 - 24 VDC at 20 mA ■ 350 ms (95%) response time ■ Two models cover temperature ranges from 0 to 500°C | | |
| | | |
| | | |
| | | The compact CI is an integrated, stainless steel sensor that makes a low-cost thermocouple replacement. | | |
| | | |
| | | | | | | | | | | | | | | | | | | |