THA- Serie TOKU Hammers - Rami Yokota B.V. - #1

Text version of the page

THA-serie TOKU Hammers WITH SCREW CAP CHISEL RETAINERS NEW! After successful introduction of the screw cap chisel retainers on TOKU’s AA-series of hammers, we decided that the THH series of hammers will also be replaced by a version with screw cap chisel retainer. This screw cap also has a side entry, so you can use wide chisels as well. The new series of hammers have the type number THA. And just like its predecessor there are 3 different versions with different energy levels. Important to know: The new hammers use chisels and points with a round collar, not an oval collar. Please check the table with available chisels and part numbers. The THA series is available from stock as from today. TOKU THA series air hammers are used in construction industry, metal processing industry, foundries and other applications. THA hammers are characterized by the very powerful blows. P R O F E S S I O N A L A I R T O O L S Ordernumber Description L (mm) under the collar B (mm) CB3210260 Moil point 260 - CB3210450 Moil point 450 - CB418 Round nose 210 - CB420 Diamond point 155 - CB3211260 Flat chisel 260 20 CB3211330 Flat chisel 330 20 CB424 Flat chisel 155 50 CB426 Flat chisel 155 38 CB3218200 Wide flat chisel 200 50 CB3218200G Wide flat chisel, bent 200 60 CB3217210 Wide flat chisel 210 95 CB3217210G Wide flat chisel, bent 210 95 Shank size 14,8 mm HEX / Ø17.3 mm x 60 mm Type Brand Shank size mm Bore diameter mm Stroke mm Blows p/min J/Blow Air cons. I/s Weight kg Inlet thread Hose diameter mm Vibration m/s2 Noise level dB(A) THA-2BRH17 TOKU 14,8 x „J 17,3 x 60 28,5 51 2.300 15,7 14,2 6,8 PT 3/8" 13 11,6 101 THA-3BRH17 TOKU 14,8 x „J 17,3 x 60 28,5 64 2.200 19,9 15 7,2 PT 3/8" 13 14,4 104 THA-4BRH17 TOKU 14,8 x „J 17,3 x 60 28,5 102 1.800 31,8 15,8 7,8 PT 3/8" 13 9,1 103 THA-serie TOKU Hammers