Catalogue - RAMCO Brochure - Ramco - (Version JPG)

the

difference

Immersion Technology—The RAMCO Difference

RAMCO Immersion Technology is defined as the use of a combination of mechanical motions within a liquid bath or drying chamber to facilitate a specific process objective.

The process can be general cleaning for applications like degreasing, precision cleaning, or stripping. The soils to be removed typically are oil, grease, dirt, smut, chips, polishing compounds, carbon, paint, ink, wax, casting residues, oxides, etc.

The process can also involve surface treatment, surface preparation, penetrant inspection or other procedures where parts are immersed in a liquid processing chamber.

The key to the RAMCO system is the effective use of an elevator within each processing chamber. The elevator is used to transport the work into and out of the chamber but its most important function is to continuously move the work within the processing zone. It is this dynamic function that allows RAMCO systems to achieve superior results in washing, rinsing and drying.

We call this Dynamic Flow Combination. The effect of Dynamic Flow Combination is better coverage of component surfaces (minimizing standing waves and/or part shadowing) producing more consistent results and accelerated processing times.

TURBO WASHING and RINSING

Combining platform oscillation with solution turbo (spray under immersion) results in constantly changing flow patterns. RAMCO turbo systems are proven to accelerate processing time.

ULTRASONIC CLEANING and RINSING

Using platform oscillation to gently move parts throughout the ultrasonic working zone provides a superior cleaning action over conventional systems by moving the work through the peaks and nodes of the wave energy. Ultrasonic cycles are sequenced with turbo cycles (above) to further accelerate the process.


	DRYING

HOT AIR KNIFE DRYING

Using high volume hot air combined with changing air flow patterns created by the oscillating elevator provides accelerated drying cycles without excessive heating.

RAMCO Immersion Technology is offered in different sizes, weight capacities, and configurations (including automation)

to accommodate a wide variety of applications. The standard MK Series is designed for loads up to 150 pounds with an MK/HD

(Heavy Duty) Series for loads up to 300 pounds. The standard CM Series is designed for loads from 500 up to

2000 pounds and is custom built for loads up to 5000 pounds. The Console Series are compact multi-station (wash/rinse,

wash/rinse/dry, etc.) versions of the MK Series for loads from 50 pounds (and less) up to 150 pounds. Automation can be added

onto any of the three series at the time of manufacture or built to be retrofit using patented RamTough Automation.

RAMCO Brochure - Ramco - #2

Cleaning machine, Solvent cleaning machine, Immersion washing machine, Washing machine, Drying machine