Low Noise Oscillator series Specific request can be addressed to RAKON [email protected] Product Description This Low Noise Oven Controlled Crystal Oscillator available in different formats from 51x51x25 mm (2"x2"xl") till 25x25x12 mm (l"xl"x0.5"), is specially designed to meet the request of the most demanding phase noise applications in the instrumentation and defence industries. The LNO 100 @ 100 MHz can be provided with a guaranteed phase noise level of up to -165 dBc/Hz @ lKHz and a G-sensitivity of up to 0.5 ppb/G (Gamma). Low Noise Oscillator (LNO), Oven Controlled Crystal Oscillator (OCXO) Guaranteed low phase noise @ 100 MHz: Pin through hole, SMD package or with connectors Frequency Stability vs. Temperature: ± O.lppm Ageing: from ± 2ppm over 10 years Dual Core Phase Noise Plot Spectrum Type L(frn) dBc/Hz Typical phase noise curve @ 100 MHz Reference for phase noise measurement Test equipments Military communication June 1st, 2012 Specifications subject to change without notice Shortform, 51001185.110, Issue Al 1/9 WWW. rakon.COm

Low Noise Oscillator series Specifications 1. Environmental conditions Parameters Conditions/remarks Min Nom Max Unit Option A 0 25 70 °C Option B -20 25 70 °C Option C -40 25 85 °C TSo -40 85 °C TNOp -55 125 °C Level as per MIL-PRF-28800F, Class 3, test equipment Level as per MIL-PRF-28800F, Class 3, test equipment Operating Temperature Switch-on Temperature Non-Operating Temperature Sine Vibration Shock 2. Electrical interface Parameters Power supply Load Impedance Control voltage Input impedance 3. Performances Parameters Nominal Frequency Relative pulling frequency range (negative slope)...

Low Noise Oscillator series 4. Minimum Guaranteed Phase Noise level Parameters @ 100 MHz, 12 V -20°C to +70°C For performance levels at other frequencies or temperature ranges, please consult your sales office. 5. Mechanical features Package name Pin Through Hole “Europack” Specifications subject to change without notice 3/9

Low Noise Oscillator series 5.1. Package PTH1 (Pin Through Hole) Supply voltage Electrical & mechanical ground Electrical & mechanical ground Frequency output Voltage control for electrical tuning Specifications subject to change without notice

Low Noise Oscillator series 5.2. Package PTH2 (Pin Through Hole) Voltage control for electrical tuning Voltage reference Supply voltage Frequency output Electrical & mechanical ground June 1st, 2012 Specifications subject to change without notice

Low Noise Oscillator series 1 Fout Frequency output 2 GND Electrical & mechanical ground 3 Vc Voltage control for electrical tuning 4 GND Electrical & mechanical ground Specifications subject to change without notice

Low Noise Oscillator series Pin number Name Function Specifications subject to change without notice

Low Noise Oscillator series 5.5. Package SMD1 (Surface Mount Device) Supply voltage Frequency output Electrical & mechanical ground June 1st, 2012 Specifications subject to change without notice

Low Noise Oscillator series 6. Ordering part number definition The part number breakdown is defined as follows: = 1.5”x1.5”x0.5” Pin Through Hole = 1.5”x1”x0.5” Pin Through Hole = 1”x1”x0.5” Pin Through Hole = 2”x2”x1” Pin Side + SMA = 1”x1”x0.5” SMD G-sensitivity SG : 2 ppb/G LG : 0.5 ppb/G Frequency, fnom Specifications subject to change without notice 9/9