See other catalogues for
Radiotronix
You may also be interested in
Text version of the page
| | | | | | | | | | | | |
| | | |
| | | 3.1.2. WI.232FHSS-25-R Pin Descriptions | | |
| | | |
| | | | | | | | | | No. | Description | | | | 1 | Ground | | | | 2 | Exception Output | | | | 3 | Buffer Empty | | | | 4 | Command input - active low | | | | 5 | UART receive input | | | | 6 | UART transmit output | | | | 7 | UART clear to send output - active low | | | | 8 | Command Response indication | | | | 9 | Analog RSSI | | | | 10 | Reserved - ISP pin | | | | 11 | ISP pin/Wake from DEEP SLEEP/Module Reset | | | | 12 | Ground | | | | 13 | Antenna port - 50 ohm | | | | 14 | Ground | | | | 15 | Ground | | | | 16 | Ground | | | | 17 | Ground | | | | 18 | Ground | | | | 19 | VCC - 2.7 to 3.6 VDC | | | | | | | | | |
| | | |
| | | Table 6, WI.232FHSS-25-R Pin Descriptions | | |
| | | |
| | | Legend | | |
| | | |
| | | | | | | | | | | Signals that are used in this implementation | | | | | Signals used for in-system programming | | | | | | | | | |
| | | |
| | | Figure 5: WI.232FHSS-250-R Pin Definitions | | |
| | | |
| | | | | | | | | | | | |