• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

MODULAR SYSTEM - HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8 - 8 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

Catalogue excerpts

RACO-ELECTRIC CYLINDER® MODULAR SYSTEM – HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8 HIGH-PERFORMANCE ELECTRIC CYLINDERS: ROBUST, RELIABLE AND FLEXIBLE RETRO-FITTING The RACO actuator system is of modular design, and thus enables the combination of the most important integral elements of the electric cylinder such as the spindle-nut system, the gearbox, the electric motor and the sensors. This versatility opens up a wide range of applications for the RACO electric cylinder type 1. Depending on the application in question, the suitable thrust-retraction unit of the electric cylinder can be equipped with a DC motor, AC motor, step motor or servo-motor. The performance data listed in the table refer to the version with a RACO 3-phase motor, which can be optionally fitted with a frequency converter. This motor can also be fitted with a parking brake and / or manual adjustment device. In order to meet the requirements of every installation situation, various attachment points are provided on the electric cylinder for fitting to the construction or the on-site foundations. All interfaces are provided for the adaptation of various sensor components such as limit switches, rotary impulse encoders, position transmitter, distance measurement systems and force measurement systems. The corresponding electronic assemblies are also available for the actuation of the electric cylinders. The configuration of these proven components in accordance with specific customer technical conditions guarantees a high level of operating safety and reliability for every individual RACO electric cylinder. Performance data, dimensions and weights for actuator size 4 (max. 2,5 kN) up to size 8 (max. 100 kN) For technical details about size 9 (max. 160 kN) up to size 11 (max. 1000 kN) please refer to catalogue 3.1.1. RACO Schwelm

 Open the catalogue to page 1

RACO-ELECTRIC CYLINDER MODULAR SYSTEM - HEAVY DUTY SERIES (TYPE 1) GENERAL INFORMATION THE RACO ELECTRIC CYLINDER The actuators of this series are very robust, and as a sealed system protected against the ingress of dirt are particularly suitable for use under high-stress conditions. Even under the most difficult conditions, constant stro- ke speed and high positioning accuracy is ensured. Many thousands of RACO electric cylinders have already proven themselves to remain highly accurate and reliable under extreme operating conditions such as heat, cold, dust and humidity. Features & Benefits: ■...

 Open the catalogue to page 2

RACO-ELECTRIC CYLINDER® MODULAR SYSTEM - HEAVY DUTY SERIES (TYPE 1) TECHNICAL INFORMATION RACO Schwelm ■ Screw incl. internal torque ■ Hard chromate plated push pull unit with rod eye clevis ■ Front cap double sealed and ■ AC motor or gear motor with brake ■ Motor optional with hand wheel for manual emergency ■ Limit switches and position transmitter in a sealed housing ■ Integrated shock absorbing system and torque switch The electric cylinders are equip- ped with the latest generation of RACO motors, which are availab- different designs and capacities All RACO motors of this series are equipped...

 Open the catalogue to page 3

RACO-ELECTRIC CYLINDER MODULAR SYSTEM - HEAVY DUTY SERIES (TYPE 1) TECHNICAL DATA Technical performance data for electric linear actuators, design A-M-C-N-T with trapezoidal screw: T1 Note: For size 6 a stroke up to 2000mm is available! Any special stroke for all sizes on request. The stroke can be freely selected for all mentioned forces in combination with the correspon- ding speed Motor: The standard connection voltage is 230/400 V AC, 50 Hz! The basic version of the RACO motors of series 4 - 8 is the non-ventilated motor with B5-flange diameter of 140 mm or 200 mm at the front, and (brake)...

 Open the catalogue to page 4

RACO-ELECTRIC CYLINDER® MODULAR SYSTEM - HEAVY DUTY SERIES (TYPE 1) TECHNICAL DATA RACO Schwelm Technical performance data for electric linear actuators, design A-M-C-N-T with ball screw: K1_ ding speed. * is available! Any special stroke for all sizes on request. The stroke can be freely selected for all mentioned forces in combination with the correspon- L" recommended. ** including end cover of 25mm, delete when accessory housings A, B or C are used, Length of motor without brakel Insulation class: The insulation systems of machinery must be allocated to a heat class according to IEC 85. The...

 Open the catalogue to page 5

RACO-ELECTRIC CYLINDER® MODULAR SYSTEM - HEAVY DUTY SERIES (TYPE 1) DIMENSIONS, DESIGNS AND COMPONENTS Rear accessory housings type IB, (S Helical geared motor for type N Thrust unit for type A, M, C, N, T Lateral accessory Lateral accessory housing \? for housing ® for type

 Open the catalogue to page 6

RACO-ELECTRIC CYLINDER® MODULAR SYSTEM - HEAVY DUTY SERIES (TYPE 1) DIMENSIONS, DESIGNS AND COMPONENTS RACO Schwelm Belt drive housing Right angle Lateral accessory Helical geared motor Rear accessory Optional equipment Trunnion brackets for sizes 4-8 as option at an extra price Hand wheel for type Front flange for type A,M,T [vertical mounting position) accessory housing •Size 8 with 4 holes

 Open the catalogue to page 7

RACO-ELECTRIC CYLINDER® MODULAR SYSTEM - HEAVY DUTY SERIES (TYPE 1) WEIGHTS AND WIRING DIAGRAM RACO Schwelm Wiring diagram for the RACO 3-phase motor Our in house application engineers will assist you with your application. Call us. " © COPYRIGHT RACO, February 2008. Technical innovations and or UJ modifications are subject to be changed without notice. RACO Elektro-Maschinen GmbH eMail: raco@raco.de

 Open the catalogue to page 8

All RACO catalogues and technical brochures

Archived catalogues

  1. Product Overview

    12 Pages

    En