Industrial motorized hose reels s.700
16Pages

ADVANCED FLUID MANAGEMENT SOLUTIONS OSE L AND H IAL ANUA R UST 00 M IND ES 7 D RI RATE SE R-OPE O

SERIES 700 MANUAL AND MOTOR-OPERATED PAINTED STEEL INDEX Technical characteristics page

^ Standard open hose guide. Enables fitting of two guides in opposite directions (see figure page 12 below) Available on request. ^ Standard closed hose guide. Available on request. ^ Manual operation hose guide for optimum winding of hose. Available on request. Manual stop preventing drum movement. The painting is highly resistant to atmospheric agents and impacts. The painted products undergo “saline mist resistance” corrosion testing according to UNI 9227 standards.

Technical characteristics The exploded view below enables easy identification of the main parts making up the industrial hose reel, at the same time indicating the technical features. As well as being available with drum in 4 different widths, the various hose reel models differ for: - type of motorisation (manual, 24V electric, 230V electric, hydraulic, pneumatic) - 2” swivel joint max. pressure (20 bar or 70 bar) - type and position of hose guide (available on request) - presence or not of the clutch which regulates the hose unwinding speed. All the models have a manual drum stop. Version...

The manual hose reels are a handy and easy answer to the problem of hose management. Given their simple operation, they are practically maintenance free. In accordance with directive Note: All the hose reels in the table are without hose 20 bar Air - Water Diesel fuel - swivel joint aluminium - seals in Viton® 70 bar Oil and allied products - swivel joint in carbon steel - seals in Viton® DRUM CAPACITY OVERALL DIMENSIONS Manual hose reel The practical handle, connected to the external rack allows easy winding of the hose at the same time controlling its positioning on the drum. There is...

The clutch is indispensable for regulating the hose unwinding speed and preventing the drum from turning empty due to inertia. The hose reel comes with the winding handle and clutch in the standard position as shown in the photo opposite. The clutch in POM, which acts on the handle (to be used only during unwinding), creates the necessary friction on the pinion, for regulating hose unwinding speed. If required by hose reel use, the handle and clutch can be shifted from the standard position indicated above to the position shown in the figure opposite, by means of two simple operations....

SERIES 700 PAINTED STEEL ELECTRIC 24V The hose reels with 24V electric motor are a handy and easy answer to the problem of hose management. Hose unwinding occurs manually whereas rewinding is done with the electric motor connected to a battery or an electrical transformer. Note: All the hose reels in the table are without hose

SERIES 700 ELECTRIC 230VPAINTED STEEL The hose reels with 230V electric motor are a handy and easy answer to the problem of hose management. Hose unwinding occurs manually whereas rewinding is done with the electric motor appropriately connected to the 230V power supply.

SERIES 700 HYDRAULICPAINTED STEEL The hose reels with hydraulic motor are a handy and easy answer to the problem of hose management. Hose unwinding occurs manually whereas rewinding is done with the hydraulic motor connected to a special control unit as indicated in the figure below. 20 bar Air - Water Diesel fuel - swivel joint aluminium - seals in Viton® 70 bar Oil and allied products - swivel joint in carbon steel - seals in Viton® DRUM CAPACITY OVERALL DIMENSIONS Hydraulic hose reel feed The hydraulic motor must be connected to a special control unit equipped with a pump with electric...

The hose reels with pneumatic motor are a handy and easy answer to the problem of hose management. Hose unwinding occurs manually whereas rewinding is done with the pneumatic motor connected to the compressed air supply as indicated in the figure below. Mounting the clutch P/N 77/2F hose reels is in accordance with Note: All the hose reels in the table are without hose 20 bar Air - Water Diesel fuel - swivel joint aluminium - seals in Viton® 70 bar Oil and allied products - swivel joint in carbon steel - seals in Viton® DRUM CAPACITY OVERALL DIMENSIONS Pneumatic hose reel feed The hose reel...

Accessories hose guide on request Manual operation hose guide, high Art. 77/22775B for width 270 mm Art. 77/24175B for width 410 mm Art. 77/25575B for width 550 mm Art. 77/26975B for width 690 mm Manual operation hose guide, low Art. 77/22775 for width 270 mm Art. 77/24175 for width 410 mm Art. 77/25575 for width 550 mm Art. 77/26975 for width 690 mm Hose guide standard closed, high Art. 77/12775B for width 270 mm Art. 77/14175B for width 410 mm Art. 77/15575B for width 550 mm Art. 77/16975B for width 690 mm Hose guide with rollers that ensure easy sliding of the hose during unwinding...

Technical characteristics clutch on request Hose reel with 24V - 230V ELECTRIC - HYDRAULIC - PNEUMATIC motor The clutch is useful during hose unwinding which is always done manually. It acts on the connection between the crown gears of the hose reel, limiting sliding. Hose unwinding speed is limited by means of the regulating knob, thereby preventing the drum from continuing to turn due to inertia. Connection between crown gears, on which the clutch acts. 24V ELECTRIC Clutch regulating knob. Art. 77/2F Clutch The clutch mounted on a freewheel bearing enables controlled unwinding of the...

Wall mounting Drill the necessary holes after choosing the ideal position, checking the solidity and thickness of the wall, marking the holes for the plugs (see template supplied with the hose reel) and ensuring that they will not pierce any plumbing pipes or electrical cables. Fix the plugs in the wall and insert the hose reel in the special seats. Tighten the 4/8 fixing nuts. 1 standard position of lifting hooks. 2 - 3 alternative positions of lifting hooks. A - B positions of hose guides. Fitting the hose Before fitting, make sure the hose reel drum is locked by means of the special...