Pedant light fittings - 16 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

pendant light fittings

 Open the catalogue to page 1

From drilling platforms through to chemical installations, from grain silos through to pharmaceutical, environmental and foodstuff-engineering facilities - R. STAHL is a partner that you can rely on. With the wide range of floodlights, pendant light fittings, compact lights, hand lamps as well as complex emergency lighting systems, every area of your plant is safely illuminated. In addition to standard solutions, R. STAHL is your partner for individual complete solutions in the explosion protected lighting system sector and for comprehensive service. Need vast quantities of light? Then the pendant...

 Open the catalogue to page 3

pendant light22,fitting zone 2, zone 21, zone division 2 A wealth of light for Zone 2. This task is accomplished both safely and extremely cost-effectively with the new and meticulously thought out 6470/6480 series of pendant light fittings from R. STAHL. In order to fulfil our promise of ›light without end‹, these light fittings have been put into standardised serial production. The pendant light fittings are available in three sizes. Size 1 allows light sources of up to 150 W to be used, size 2 up to 250 W and size 3 up to 600 W. The entire 6470/6480 series of light fittings meets the IEC and...

 Open the catalogue to page 4

series 6470/6480 Description > for gas discharge lamps up to 600 W > pendant light fittings in a restricted breathing version featuring diverse mounting options > glass cover made of impact-resistant, temperature change-resistant borosilicate glass > housing material made of seawater-resistant aluminium > external reflector and wire guard available Use > for general lighting systems with a higher suspended mounting in outdoor installation or production halls > Suitable for low ambient temperatures – 40 °C to +55 °C (depending on lamp type) > international approvals ATEX, IEC Ex, GL (für 6470)...

 Open the catalogue to page 5

pendant light fitting flexible, maintenance-friendly, economical With the 6470/6480 series of pendant light fittings, you can rest assured that your work will be as efficient as humanly possible. The numerous different mounting options featured in this series of light fittings ensure a suspension method precisely tailored to your specific needs without any improvisations. Installation is exceedingly efficient and easy. The generously-sized terminal compartment is opened by a hinge, the cables can be quickly mounted and the light fitting is easily closed again. When the glass cover is opened to...

 Open the catalogue to page 6

series 6470/6480 Mounting options > direct ceiling installation > suspension-mounting using ring bolts > ceiling or wall installation with an adjustable stainless steel mounting bracket > mast-mounting 25° or straight > suspension-mounting using conduit Installation > uncomplicated and efficient > large, well-arranged terminal compartment > quick apparatus replacement > easy opening and closing using a hinge > quick lamp replacement > glass cover and wire guard hang on a chain > extremely maintenance-friendly Lamp types > all-purpose lamps > halogen incandescent lamps > mercury blended lamps >...

 Open the catalogue to page 7

pendant light fitting zone 1, zone 21 Even in Zone 1, it will be bright as day. The 6050 series of pendant light fittings from R. STAHL has also been put into standardised serial production in order to provide you with vast quantities of light. Approved according to IEC for Zone 1 and Zone 21, they can be used worldwide both onshore and offshore. They are installed using eyelets or the swivelling mounting bracket. The external terminal box considerably facilitates and expedites installation. This modern 6050 series of pendant light fittings from R. STAHL is virtually maintenance-free. An extremely...

 Open the catalogue to page 8

adjustable stainless steel mounting bracket for wall mounting ceiling installation with single point mounting ceiling installation with two eyelets easily accessible connection box secure option for holding the glass cover during maintenance work Description > for mercury blended and gas discharge lamps up to 400 W > pendant light fittings housed in a flameproof housing with Ex e connection boxes > seawater corrosion-resistant housing made of aluminium alloys, optional powder coated > glass cover made of impact-resistant, temperature change-resistant pressed glass > stainless steel wire guard...

 Open the catalogue to page 9

Function testing with the 6470 series of pendant light fittings R. STAHL places a high priority on the importance of developing new components, systems and processes Moisture and type of protection test with the 6050 series of pendant light fittings been recognised by independent testing authorities. The R. STAHL quality management ensures the high in the lighting sector. Therefore, all important tests are conducted directly in our laboratories that have product level throughout the entire development and production phase. The light fittings undergo functional checks, hardness and safety tests...

 Open the catalogue to page 11

certified approvals worldwide R. STAHL is one of the world’s leading manufacturers of explosion protected components and systems. We provide our customers with tailored, technologically pioneering solutions, including all the related advisory and customer services. In addition, the R. STAHL specialists collaborate together with national and international committees and have actively invested their many years of experience in helping to design and further develop improved safety regulations across the globe. This is precisely why we can also design, plan, configure and manufacture products within...

 Open the catalogue to page 13

technical data for pendant light fittings 6470/6480 Explosion protection gas explosion protection dust explosion protection Certifications gas explosion protection dust explosion protection other approvals marking rated operational voltage Ue power factor protection class connection options Material housing material glass cover cover seal glass seal mounting bracket external reflector wire guard housing lock installation level of protection ambient temperature wire guard and external reflector Cable entries standard special cable gland threaded sockets for mast adapter light fittings IEC Ex, GL...

 Open the catalogue to page 14

All R. STAHL catalogues and technical brochures

  1. Ex-Poster

    1 Pages

    En
  2. BROCHURE: LIGHTING

    24 Pages

    En
  3. AK00 III

    12 Pages

    En
  4. EN/IEC 61439

    4 Pages

    En
  5. SERIES 200

    8 Pages

    En
  6. HMI Oil and Gas

    20 Pages

    En
  7. HMI Overview

    36 Pages

    En
  8. SolConeX

    12 Pages

    En
  9. GUBox

    4 Pages

    En
  10. EXLUX 6001

    4 Pages

    En
  11. Focus customer

    24 Pages

    En
  12. AK00 III

    5 Pages

    En
  13. 9160601310 de en

    24 Pages

    En
  14. Lighting

    16 Pages

    En
  15. Isolators

    6 Pages

    En
  16. Safety Barriers

    27 Pages

    En
  17. Ex Magazine 2012

    70 Pages

    En
  18. IS1+Remote I/O

    16 Pages

    En
  19. Stahl - Catalog

    1306 Pages

    En

Archived catalogues

  1. ISpac isolators

    16 Pages

    En
  2. IS1 remote I/O

    12 Pages

    En
  3. Fieldbus Solutions

    16 Pages

    En
  4. Cable glands

    18 Pages

    En
  5. Lighting

    16 Pages

    En
  6. Company brochure

    24 Pages

    En
  7. Marine Solutions

    24 Pages

    En