Catalogs >
R. STAHL AG >
AK00_III

AK00_III
5Pages

Catalog excerpts

WLAN Access Point Series 8265 > IEEE 802.11a/b/g or 802.11n (up to 300 Mbit/s) - Standard > Degree of protection IP66 > For use from -30 ... +60 °C > Individual WLAN or wireless solution for use with any device The WLAN Access Point enables wireless data transmission in hazardous areas. For instance, it is possible to access data in a company network from a PDA or a notebook with WLAN interface, transmitting data or controlling sequences. The WLAN Access Point from R. STAHL stands out due to its easy installation and a robust enclosure which is suitable for rough industrial environments. Its wide temperature range allows to be used almost under all conditions. The device supports the widely used standards IEEE 802.11a/b/g and 802.11n, with up to 300Mbits/s. ATEX Zone Installation in

Open the catalog to page 1

WLAN Access Point Series 8265 Selection Table Version Basic version Wire-line interface Order number • Ex d enclosure 8265/54 • WLAN access point industrial design 1 external, omni-directional antenna Frequency 2.4 GHz Cable length aprox. 5 m 2 external, omni-directional antennas Frequency 2.4 GHz Cable length aprox. 5 m WLAN Access Point Series 8265 Explosion Protection Version Global (IECEx) Gas and dust Europe (ATEX) Gas and dust Certifications and certificates Certificates Further parameters Installation Explosion Protection Version Europe (ATEX) Gas Dust WLAN Access Point Series 8265...

Open the catalog to page 2

WLAN Access Point Series 8265 Technical Data Version Wireless Frequency band A6 WLAN Access Point Series 8265 Use approved in Transmission power Data rates (modulation) 802.11a: Radio standards Radio licence 802.11a, 802.11b, 802.11g, 802.11i or in addition optional 802.11n FCC part 15, ICES-003, Class A digital apparatus RTT&E, ETS 300-826, ETS 300-328, EN 60950 USA, Canada, EU, Norway, Switzerland, Russia, Australia, New Zealand further regional approvals on request up to 50 mW (adjustable) 54, 48, 36, 24, 18, 12, 9, 6 Mbit/s (OFDM) 54, 48, 36, 24, 18, 12, 9, 6 Mbit/s (OFDM) Antenna...

Open the catalog to page 3

WLAN Access Point Series 8265 Customer-Specific Version of the WLAN Access Point If none of the given basic versions suits your needs, we will be glad to develop a customer-specific configuration. Please fill in the form and enclose it to your request. General requirements Explosion protection Ingress protection without External, omni-directional antenna Number (data see page ) Frequency range 2.4 GHz (standard) 1 Wire-line interface Standard 100BASE-T, Ethernet CAT6 cable, direct cable entry 100BASE-FX, Fibre optic cable Ex op is Power supply Power over Ethernet (for installation in zone 1...

Open the catalog to page 4

WLAN Access Point Series 8265 A6 Dimensional Drawings (All Dimensions in mm / inches) - Subject to Alterations 8265, size 4, 1 external antenna 8265, size 4, 2 external antennas We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding.

Open the catalog to page 5