9500+ Series Pulse Generators - Quantum Composers - #4

Text version of the page

SPECIFICATIONS 9500Plus Series 9600Plus Series MODELS 9512+ - 2 Channels, 2 independent outputs 9612+ - 2 Channels, 2 independent outputs 9514+ - 4 Channels, 4 independent outputs 9614+ - 4 Channels, 4 independent outputs 9518+ - 8 Channels, 8 independent outputs 9618+ - 8 Channels, 8 independent outputs All models have digital pulsewidth and delay control All models have digital pulsewidth and delay control PULSE GENERATION modes single shot, burst, continuous, duty cycle single shot, burst, continuous, duty cycle multiplexer combine any channel combine any channel delay 0 - 1000 sec. 0 - 1000 sec. negative delay 0 - 1000 sec. 0 - 1000 sec. pulsewidth 10 ns to 1000 sec. 10 ns to 1000 sec. resolution 1 ns 10 ns accuracy 1.5 ns + 0.0001 delay 10 ns + 0.0001 delay time base 100 MHz, 25 PPM crystal oscillator 80 MHz, 50 PPM crystal oscillator RMS jitter <400 ps <5 ns burst mode 1 to 1,000,000 1 to 1,000,000 EXTERNAL TRIGGER/GATE rate DC to 5 MHz DC to 2 MHz threshold 500 mV to 15 V 500 mV to 15 V input range 0 - 30 V 0 - 30 V trigger slope rising or falling edge rising or falling edge RMS jitter <5 ns <25 ns insertion delay <150 ns <250 ns INTERNAL RATE GENERATOR modes single shot, burst, continuous, duty cycle single shot, burst, continuous, duty cycle rate (T0 period) 200 ns to 5000 sec. (0.0002 Hz to 5 MHz) 200 ns to 999.99999 sec. (0.001 Hz to 2 MHz) resolution 10 ns 10 ns accuracy 5 ns + 0.0001 x period 5 ns + 0.0001 x period RMS jitter <400 ps <500 ps burst mode 1 to 1,000,000 pulses 1 to 1,000,000 pulses OUTPUTS outputs TTL/CMOS, Adjustable 2 - 20 V, 35 V (optional) Adjustable 2 - 20 V impedance 50 Ohms 50 Ohms slew rate >0.5 V/ns >0.2 V/ns overshoot <100 mV + 10% of pulse amplitude <100 mV + 10% of pulse amplitude up to 4 independently adjustable outputs; 8 channel units 1 & 6, 2 & 7, ect. share the same output voltage. amplitude (adjustable mode) 1 - 10 V into 50 Ohm load 1 - 10 V into 50 Ohm load 2 - 20 V into high impedance load 2 - 20 V into high impedance load CONFIGURATIONS user set-up storage capacity 12 6 COMPUTER INTERFACE RS232 standard, 4800, 9600, 19200, 38400 57600 & 115200 Baud standard, 4800, 9600, 19200 & 38400 Baud GPIB Interface IEEE 488.2 standard optional USB Interface v 1.0 standard n/a Ethernet optional (replaces standard USB) n/a OPTIONS E – Ethernet computer interface n/a H – High voltage outputs (35 V) T – Extended time base (10 MHz PLL / 20 MHz PRF) I – Pulse incrementing X – Separate gate and trigger inputs GENERAL dimensions 10.5” x 8.25” x 5.5” 7.5” x 9” x 4” weight 8 lbs. 6 lbs. power 20 W, 100 - 240 VAC, 47 - 63 Hz <1 A 20 W, 100 - 240 VAC, 50 - 60 Hz accessories 19” Rack Mount (single & double) 19” Rack Mount (single) LabVIEW® is a registered trademant of National Instruments Corporation P.O Box 4248 Bozeman, MT 59772 Phone: 406-582-0227 Fax: 406-582-0237 ©2006 Quantum Composers, Inc. All Rights Reserved. 1-800-510-6530 email: info@quantumcomposers.com www.quantumcomposers.com