PCUS 11 G/H Series - Quality Network - #1

/ 1


catalogue search
PCUS 11 G/H Series - Quality Network
P. 01
Page:
PCUS 11 G/H Series - Quality Network


See other catalogues for Quality Network
You may also be interested in

Detector, Software, Test set, Ultrasonic detector, Test system


Text version of the page

PCUS 11 (G/H-Series)

Channels: 1 Transmitter, 1 Receiver Frequency Range: 0.5 - 20 MHz (-3dB), 20kHz to 27MHz with optional filter modules Filters: 4 narrow band filters, 1MHz (0.5 to 2.0MHz) 2MHz (1.0 to 4.0 MHz), 4.5MHz (2.25 to 9.0 MHz), 10.0MHz (5.0 to 20.0 MHz); other filters available upon request Amplifier Range: 0dB to 90dB including DAC, adjustable in 0.1 dB increments Damping: 20dB, adjustable in 0.1 dB increments Dynamic Range: 110dB Electronic DAC: 80dB range, adjustable in 0.1 dB increments, maximum of 256 editable, equidistant points Gates: 4 gates, 1 signal-start (trigger) gate Trigger In: TTL, high-active/low-active, Pulse width >100ns, Lemo-00 external, MCX internal Trigger Out: TTL, high-active/low-active, Pulse width 200ns, Lemo-00 external, MCX internal Clock In/Out: LVTTL, 80MHz, MMCX internal Impedance: 50 , 300 selectable Transmitter Pulse: Square pulse, negative Pulser: -300V or -220V (50 ), -550V or –350V (300 ) Pulse Rise time: <9.5ns (10% to 90% pulse height) Pulse width: 63ns to 480ns, adjustable Pulse Repetition Rate: 20Hz to 5kHz (max.) Sampling Rate: 160 (virtual), 80, 40, 20, 10 MS/s, selectable, 8bit AD/C Data Memory: 64k samples Averaging: Real-time 2, 4, 8, 16, 32, 64, and 128 samples selectable A-scan Processor: RF, positive/negative half-wave, full-wave, and summation of up to 256 samples Data Output Format: 8bit or 16bit Sweep Range, 80 MS/s: max. 4,915mm (193.5”), longitudinal mode in steel, pitch-catch max. 2,457mm (96.7”), longitudinal mode in steel, pulse-echo Sweep Range, 10 MS/s: max. 39,300mm (1,547.2”), longitudinal mode in steel, pitch-catch max. 19,600mm (771.6”), longitudinal mode in steel, pulse-echo Parameter Sets: 8 maximum, automatic cycle sequence available Power Requirements: 5V ( 0.5) 13W typical 16W max., 4.3W in power saving mode Interface: PCI-Bus V2.1, I/O or Master DMA 32 bit Dimension: 105mm x 312mm (full size) PCI board; 400g (0.9lbs.) Connectors: Lemo 00 for pulse-echo, transmit and receive; Lemo-00 external for Trigger In/Out and MCX internal receptacles (on board) PCUS 11 G/H-Series Datasheet October 2005 Page 1 of 1
This document contains information proprietary to QUALITY NETWORK INC.; it is submitted in confidence and is to be used solely for the purpose for which it is furnished and returned upon request. This document and such information is not to be reproduced, transmitted, disclosed, or used otherwise in whole or in part without the written authorization of QUALITY NETWORK, INC.

pageCatalog pdf di En 2012-05-22-31