• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

iFLEX iRIS Laser - 7 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

Catalogue excerpts

iFLEX-iRIS™ Laser Systems The Qioptiq iFLEX-iRIS™ solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for integration into instruments that demand high performance yet need to retain a small form factor. The lasers are mode-hop free and wavelength stabilized as a result of active temperature control. All CW iFLEX-iRIS lasers operate in automatic power control mode using an internal feedback loop. This feature provides highly stable output power, and ensures the high power stability performance is maintained throughout the product lifetime. Well controlled digital modulation can be offered through the electrical interface PINs. This feature must be selected with order. High stability operation Low noise Miniaturized for easy integration Integrated electronics and TEC temperature stabilized control Conductively cooled through baseplate Automatic Power Control Mechanical shutter Digital modulation CDRH compliant interlock unit Industry compatible footprints and beam exit positions OEM versions on request Fiber coupling - please refer to the fiber coupled datasheet for information about fiber coupled iFLEX-iRIS lasers Adaptor cable when an iFLEX-iRIS is used as a retrofit replacement for an iFLEX2000™ laser To ensure optimum performance is maintained throughout the product lifetime, the iFLEX-iRIS laser design is robustly tested to Telcordia specifications.

 Open the catalogue to page 1

iFLEX-iRIS laser specification overview Operating Wavelengths Wavelength (nm) Technical Specifications Laser parameters Center wavelength Beam divergence (full angle) Pointing stability Polarization ratio Power stability (8 hours) Optical Noise (20Hz-2MHz) Spatial mode Storage temperature Operating pressure Operating temperature Operating & storage humidity *Center wavelength exceptions at: 637nm (+6/-5nm), 642nm (+5/-7nm), 660nm (+4/-6nm), 670nm (±10nm), and 730nm (±10nm) **Model specific please contact Qioptiq for details Custom OEM versions on request Static alignment Beam position Beam angle...

 Open the catalogue to page 2

iFLEX-iRIS laser specification overview Operating Wavelengths: Wavelength (nm) Technical Specifications Laser parameters Environmental conditions Center wavelength Pointing stability Polarization ratio Power stability (8 hours) Optical Noise (20Hz-2MHz) Spatial mode Beam diameter at 1/e2 Beam divergence (full angle) Storage temp. Operating pressure Operating temp. Operating & storage humidity Static alignment Beam position Beam angle Electrical Power supply Max. base plate temp. Laser Dimensions Laser only *Model specific please contact Qioptiq for details Custom OEM versions on re

 Open the catalogue to page 3

Model: iFLEX-iRIS-X0 iFLEX-iRIS laser with central laser aperture position Note: it is possible to attach a kineFLEX fiber delivery system to the iFLEX-iRIS-X0 laser with central laser aperture (beam exit) position. The kineFLEX can be attached by customers, as a future upgrade option. LASER APERTURE LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT CW EMISSION <500mW 400-410nm IEC60825-1:2007 DOWEL HOLE Ø2.02/2.03 x 3 DEEP DOWEL SLOT Ø2.02/2.03 x 3 DEEP iFLEX-iRIS electrical interface Pin Monitor Photodiode Output (Vmon) Operating Current Output (Vop) External Power Control Laser...

 Open the catalogue to page 4

Model: iFLEX-iRIS-X2 iFLEX-iRIS laser with offset laser aperture position Note: the kineFLEX fiber delivery system cannot be directly attached to the iFLEX-iRIS-X2 laser with offset laser aperture (beam exit) position, and an adaptor interface would be required. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT CW EMISSION <500mW 400-410nm IEC60825-1:2007 LASER APERTURE DOWEL HOLE Ø2.02/2.03 x 3 DEEP DOWEL SLOT Ø2.02/2.03 x 3 DEEP Other industry footprints and beam offsets may be available. Please contact Qioptiq Sales for details. iFLEX-iRIS electrical interface Pin Monitor Photodiode...

 Open the catalogue to page 5

iFLEX-iRIS CDRH compliant interlock remote unit For CDRH compliance a bench top standalone laser system must be used with a CDRH compliant interlock remote unit power supply. Qioptiq is pleased to offer this iFLEX-iRIS CDRH compliant interlock remote unit for use with the iFLEX-iRIS laser systems. Note: The iFLEX-iRIS CDRH compliant interlock remote unit includes keyswitch, keys, interlock plug and power supply. This CDRH compliant interlock unit is recommended for bench top use. ~40mm CORD End panel views of the iFLEX-iRIS™ interlock remote unit detailing the location of the different connectors...

 Open the catalogue to page 6

iFLEX-iRIS Laser Order Codes iFLEX-iRIS laser with centralised laser aperture X0 Central laser aperture Laser Wavelength (nm) Beam Diameter (mm) Laser Power (mW) Operating mode (CW = NP, Digital modulation = T) iFLEX-iRIS laser with offset laser aperture X2 Offset laser aperture Laser Wavelength (nm) Beam Diameter (mm) Laser Power (mW) Operating mode (CW = NP, Digital modulation = T) For example: iFLEX-iRIS-X2-640-0.7-50-T This iFLEX-iRIS laser operates at 640nm and outputs 50mW power. The output beam is collimated to 0.7mm diameter. The beam exit position is offset. This laser may be modulated...

 Open the catalogue to page 7

All Qioptiq catalogues and technical brochures

  1. HiRes-XR(S)

    4 Pages

    En
  2. Micro-Optics

    2 Pages

    En
  3. UV Light

    5 Pages

    En
  4. Microbench

    44 Pages

    En
  5. Optics for Laser

    4 Pages

    En
  6. Thin Film Coatings

    20 Pages

    En
  7. Plano Optics

    46 Pages

    En
  8. Nanobench

    22 Pages

    En

Archived catalogues