PUDA,vacuum packing machine,DCS-FZK,chemical and industrial - 1 Pages

  1. P. 1

Catalogue excerpts

DCS-FCQ Series: Air Packer for Valve Bag DCS-FZK Series: Vacuum Packer for Valve Bag Product Description: Product Description: This series of packers are designed to fill valve bags with a range of dry granular, pelleted, powdered material or the mixture of them. Fast packing speed and high accuracy are two of the many advantages. This type of machine is designed to package extremely light and They are ideal for a wide range of products such as Barite, Silicon Sand, Calcined Flint Clay, Active Carbon, fine powders with low bulk density and high air content. The Refractory Materials, Dry Mortar, etc. vacuum chamber and the bulk/trim flow system draw the product into the bag at uniform rates, providing excellent filling accuracy, tight package, and non-dusty environment. Applicable materials include Silica Powder, Carbon Black, White Carbon Black, Superconducting Carbon Black, Active Carbon in Powder, Stearate, Graphite, etc. Technical Parameters: •Weighing Range: 10-50 kg •Packing Rate: 1-4 bags/minute (packing speed depends on the material's features and package material) •Weighing Accuracy: ±0.20.4 •Applicable Voltage: AC220V-440V 50/60Hz Three Phases and Four Lines (clients should supply the voltage class and Working Principle: frequency at their local place) DCS-FCQ series packing machines use pressed air to •Air Source Requirement: 0.4-0.8 MPa Dry Compressed Air,Total Air Consumption: 0.4m³/min feed material into bags. Low pressure air is used to •Applicable Environment: Altitude ≤ 2000meters, Humidity ≤ 95% RH Non-congealable Dew, condition the product (by fluidizing, wind conveying, or Operating Temperature: 0℃50℃, Storage Temperature : -20℃70℃ by combining both methods) and provide differential pressure necessary to move the product from the hopper to the bag. The quantity of the air is controlled through a valve on top of the enclosed hopper. When Working Principle: target value reached, the valve at the sprout closes and This series of packers has vacuum chamber which connected with negative stops the feeding. The filled bag is ready to be moved pressed air source to help the feeding device to move material into bags. from bag holder and the machine is prepared for a new Material is fed into the surge bin from where the bulk/trim filling system move the material from, at the same time, the negative pressure from the vacuum chamber helps to “drag” the product into the bag that placed in the Technical Parameters: •Weighing Range: 10-50 kg •Packing Rate: 3-8 bags/minute (packing speed depends on the material's features and package material) •Weighing Accuracy: ±0.2-0.6 •Applicable Voltage: AC220V-440V 50/60Hz Three Phases and Four Lines (clients should supply the voltage class and frequency at their local place) •Air Source Requirement: 0.4-0.8 MPa Dry Compressed Air, Total Air Consumption: 0.4m³/min •Applicable Environment: Altitude ≤ 2000meters, Humidity ≤ 95% RH Non-congealable Dew, Operating Temperature: 0℃50℃, Storage Temperature : -20℃70℃ vacuum chamber. When reaching the pre-set weight value, filling device and vacuum source is stopped, the vacuum chamber’s gate opens and the filled bag could be taken off manually or automatically. Specification and Model Weighing Range Packing Rate Reference Weight Reference Size L×W×H(m) Proper Application DCS-FZKC Vacuum DCS-FZKJ Vacuum and Screw Powdery Materials with Granule DCS-FZKY Vacuum and Impeller DCS-FZKQ Vacuum and Air forced

 Open the catalogue to page 1

All Qinhuangdao Puda Electronic catalogues and technical brochures