video corpo

QI695 - 3 Pages

  1. P. 1

  2. P. 2

  3. P. 3

Catalogue excerpts

QI695 6 MP CAMERA The Analytical Instrumentation Designer’s Answer to Faster Better Instrument designers challenged to improve sensitivity and throughput have kept a close watch on scientific cameras to provide multiplexed and high throughput assays with superior sensitivity, linearity, dynamic range, and data quality. Unfortunately, the desire for a better instrument often ran counter to meeting instrument cost targets. The QImaging QI695 answers that challenge. Unlike commodity machine vision hardware, the QImaging QI695 has all the features of a true scientific camera that will improve limits of detection and quantification: State of the art, highly efficient CCD sensor technology, full flexibility over image readout patterns and signal binning, and deep cooling to virtually eliminate dark current noise. With the QI OEM series cameras, QImaging introduces Intelligent Quantification™ — on camera intelligence features that correct for defective pixels, removes accumulated dark current, and greatly extend dynamic range beyond 16 bits. A high speed 50 MHz pixel digitization = Gel Electrophoresis = Biochip Measurements rate increases camera FPS when focusing and spot finding, and an ultra-low noise 725 KHz pixel rate is used to extend limits of detection to extremely low concentrations. The QI695 uses the latest USB3.0 computer interface for efficient, = High Content Screening = Biomedical Analyzers reliable data transfer, tested at over 1 Million frames. For embedded hardware, the QI695 provides USB2 compatibility at reduced frame rates. Software integration is straightforward with QImaging’s PVCAM = Cell Screening = Precision Photometry = Clinical Diagnostics API, allowing the instrument designer to easily implement many QImaging and Photometrics brand camera models in future designs. Traditionally, the use of scientific cameras was only possible in the most expensive, highest performing instruments. Through careful selection = Tissue and Cellular Imaging of image sensors and components the QI695 is an affordable OEM solution, even for routine, bench top instruments. Customers rely on the combined expertise of QImaging and Photometrics to provide a robust ISO9001 manufacturing process and responsive global network of customer service and repair centers.

 Open the catalogue to page 1

OEM NEEDS Extreme Low Light SOLUTIONS = 75% peak QE combined with low noise electronics reveals the weak signals missed by industrial cameras = Power Supply = Increased exposure time and binning enables = USB 3.0 Cable detection of the faintest signals with deep sensor cooling to < 2 e-/pixel/hour Rapid Find and Focus = 50 MHz two port readout simplifies finding and focusing on samples, while the ultra-low noise 725 KHz readout reduces electronic noise to neglible levels Perfect Image Capture = Advanced anti-blooming and two-shot EDR and HDR modes extend dynamic range using separate exposures...

 Open the catalogue to page 2

CAMERA Digital Output Digitization Rate USB3: 50MHz high frame rate, 725 KHz low noise mode USB2: 17.5MHz high frame rate, 725 KHz low noise mode Read Noise (typical) Frame Rate 6.9 fps at full resolution, 50 MHz 12.1 fps binned 2x2 Exposure Time Range Supported Binning Modes Dark Current Rate (typical) Sensor Cooling -20° C stabilized at 22° C ambient Thermoelectric cooling with forced air Intelligent Quantification (iQ) Features Defect correction (nearest neighbor) Dynamic Dark Frame subtraction* Extended and High Dynamic Range* Cameras optimized for application needs Unique part number/Bill...

 Open the catalogue to page 3

All QImaging catalogues and technical brochures

  1. Rolera MGi Plus

    2 Pages

    En
  2. Retiga-2000DC

    2 Pages

    En
  3. Rolera EM-C2

    2 Pages

    En
  4. wLS

    2 Pages

    En
  5. QCapture PRO 7

    2 Pages

    En
  6. QI674

    3 Pages

    En
  7. QI825

    3 Pages

    En

Archived catalogues