Conveyor Selection Guide - QC Industries - #2

Text version of the page

»» Precision indexing accurate to ±.015” »» Positive, non-slip timing pulley and self-aligning sealed drive bearings »» Available with custom molded cleats to fit your application »» Available convertible timing belt cleats are easily attached or removed to meet changing application requirements » Flat Belt 125 Series »» Very low profile (1.89”) — can go where conventional conveyors will not fit »» Lube-for-Life Bearings make these conveyors maintenance-free »» Unique snap-in sealed tail assembly — maintains proper belt tension and tracking even through belt changes » Cleated » Stainless Steel » Magnetic »» Cleats are available in 7 heights from 5mm up to 3” high »» A corrugated sidewall belt is also available with 1” cleats »» Custom-positioned ceramic magnets help achieve an optimum magnetic field and smooth product movement »» Ideal for chip and scrap removal »» Stainless steel frame and corrosion resistant components for wipedown applications »» Corrosion resistant accessory choices » Specifications »» Z-Track™ makes tracking easy and locks it in — even through belt changes »» Five standard angles: 30º, 45º, 60º, 75º and 90º (Custom angles available) »» Belts available with cleats up to 3” high and corrugated sidewalls Five Standard »» Lube-for-Life Bearings for maintenance-free operation Configurations » »» Widths: 2” to 24” »» Lengths (Standard): 18” to 12’ »» Lengths (Extended): 13’ to 23’ »» Profile: 1.89” high »» Load Capacity: Up to 450 lbs. »» Speed Range: Up to 225 fpm » Motorized Drive Pulley InnerDrive »» Quiet, efficient 24vdc motor located inside the drive pulley — all within a low 2.54” profile »» Maintenance-free — no bearings or gearboxes to lubricate »» Safe — Low-voltage protects workers from dangerous currents »» Variable speed control card easily integrates with automation systems for “run on demand” applications, using inhibit/run controls from devices such as timers and photo-eyes »» Lighted indicators identify status at a glance » Specifications »» Widths: 12”, 18”, 24” »» Lengths: 18” to 144” »» Profile: 2.54” high »» Load: Up to 100 lbs. »» Speeds: Incrementally variable to 60 fpm » Indexing 300 Series » Heavy Duty 400 Series » Angled Frame 125Z Series » Plastic Chain Flextrac »» Low Profile — drive end 3.03” high, frame only 2.41” »» Industry standard 1” pitch belts »» More than 100 belt styles to fit any application »» High speeds — up to 375 fpm »» Heavy loads — up to 500 lbs. »» Wear strips and center support for increased belt life and ultra quiet operation »» Lube-for-Life Bearings for increased bearing life and maintenance-free operation » Specifications »» Widths: 4” to 24” »» Lengths: 2’ to 30’ * »» Profile: 3.03” high (max) »» Load: Up to 500 lbs. »» Speeds: Up to 375 fpm »» Belt Pitch: 1” » Flush Grid » Flat Top » Specialty »» Easiest to clean »» Ideal for food processing applications »» Include roller-top, high-friction, and nub-top belts »» Ideal for accumulation and applications involving small parts »» Heavy loads — Up to 630 lbs. »» Very low profile (1.89”) — can go where conventional conveyors won’t fit »» Lube-for-Life Bearings make these conveyors maintenance-free Also available with Kevlar Timing Belt »» Heavy duty load carrying capacities up to 600 pounds »» High speeds — up to 2000 fpm »» Center-drive and end-drive versions available » Specifications »» Widths: 2” to 24” »» Lengths (ED): 3’ to 15’ »» Lengths (CD): 4’ to 28’ »» Profile: 1.89” high »» Load: Up to 630 lbs. »» Speeds: Up to 360 fpm »» Belt is highest point on conveyor » Specifications »» Widths: Up to 60” »» Lengths: Up to 100 feet »» Profile: 3” high »» Load: Up to 600 lbs. »» Speeds: Up to 2000 fpm »» Optional V-Guide Available »» Washdown Available »» Magnetic Version Available » Specifications »» Widths: 8” to 24” »» Lengths: 36” to 240” »» Profile: 1.89” high »» Load Capacity: To 125 lbs. »» Speed Range: To 225 fpm » Specifications »» Widths: Up to 18” * »» Lengths: Up to 24’ * »» Profile: 3” high »» Pulley: 10mm pitch teeth »» Speeds: Up to 2000 fpm » Center/End Drive 250 Series Z Conveyor L Conveyor R Conveyor N Conveyor U Conveyor * Lengths up to 100’ available as special orders * More widths and lengths available as special orders