250 Series Conveyors - QC Industries - #2

Text version of the page

QC Industries 513.753.6000 93 Features & Benefits Tail Assembly Drive Assembly Conveyor • Low profile design provides tight product transfers and the ability to fit into space-constrained areas • Single piece 10-gauge steel framework is laser cut and formed to create a single-body frame construction, ensuring frame integrity • Tight tolerance belting and our unique snap-out sealed tail assembly provide for a quick belt change (less than 5 minutes) that is normally achieved without having to remove the drive packages or side rails • High tensile strength belts offer superior strength-to-weight ratio and are available in over 50 various types • All components in our conveyors are produced on state-of-the-art manufacturing equipment • Multi-point belt tension is achieved through a snap-in eccentric tail assembly designed to pull through the natural elongation characteristics of the belt and provide quick and easy belt change capacity • Crowned sealed tail assembly is designed to promote excellent belt tracking and is equipped with superior needle bearings with seals that are filled with high performance grease • Thrust washers designed into the tail assembly provide axial float, which allows the assembly to move with the natural camber of the belt and protect bearings against off-center load conditions • Grease fitting design in the tail assembly allows for lubrication of bearings while the conveyor is running, resulting in zero down time during lubrication • Precision bearing alignment is guaranteed within the pressed tail assembly, providing optimal conditions to move the heaviest loads in low profile conveyors • Eccentric tracking bushing allows for single point tracking control at the idler ends of the conveyor • Straight knurl design used to prevent premature wear on the carcass of the belt and still provide superior grip to overcome start-up inertia • Crowned sealed drive assembly is designed to promote superior belt tracking, and is equipped with superior sealed ball bearings that are filled with high performance grease • Thrust washers designed into the drive assembly back-flexing idlers provide axial float, allowing the assembly to move with the natural camber of the belt and protect bearings against off-center load conditions • Grease fitting design in each bearing housing allows for lubrication of bearings while the conveyor is running, resulting in zero down time during lubrication • Precision bearing alignment is guaranteed within the drive assembly though self-aligning bearings, providing optimal conditions to move the heaviest loads in low profile conveyors • Threaded tracking adjustment points provide simple responsive belt tracking that retain settings, even during belt removal