125Z Series Conveyors - QC Industries - #2

Text version of the page

QC Industries 513.753.6000 Features & Benefits 69 • Single point belt tension is achieved through a snap-in eccentric tail assembly designed to pull through the natural elongation characteristics of the belt and provide quick and easy belt change capacity • Crowned sealed tail assembly is designed to promote excellent belt tracking and is equipped with superior needle bearings with seals that are filled with high performance grease • Thrust washers designed into the tail assembly provide axial float, which allows the assembly to move with the natural camber of the belt and protect bearings against off-center load conditions • Grease fitting design in the tail assembly allows for lubrication of bearings while the conveyor is running, resulting in zero down time during lubrication • Precision bearing alignment is guaranteed within the pressed tail assembly, providing optimal conditions to move the heaviest loads in low profile conveyors • Eccentric tracking bushing allows for single point tracking control at the idler end of the conveyor • Straight knurl design used to prevent premature wear on the carcass of the belt and still provide superior grip to overcome start-up inertia • Crowned sealed drive assembly designed to promote superior belt tracking, and is equipped with superior needle bearings with seals that are filled with high performance grease • Thrust washers designed into the drive assembly provide axial float, which allows the assembly to move with the natural camber of the belt and protect bearings against off-center load conditions • Discreet needle fitting lubrication points in each bearing housing allows for lubrication of bearings while the conveyor is running, resulting in zero down time during lubrication • Precision bearing alignment is guaranteed within the pressed bearing assemblies that are piloted on body fitted studs, providing optimal conditions to move the heaviest loads in low profile conveyors • Threaded tracking adjustment points provide simple responsive belt tracking that retain settings, even during belt removal • Drive pulley is available in solid output design and dual output design • Low profile design provides tight product transfers and the ability to fit into space-constrained areas • Single piece 10-gauge steel framework is laser cut and formed to create a single-body frame construction, ensuring frame integrity • Tight tolerance belting and our unique snap-out sealed tail assembly provide for a quick belt change (less than 5 minutes) that is normally achieved without having to remove the drive packages or side rails • Fixed angles ranging from 30O to 90O minimize the number of required components, reducing costs as well as providing an industry best load carrying capacity • High tensile strength cleated belts offer superior strength-to-weight ratio and are available in various styles and heights. Cleats are always high frequency welded to customer desired spacing and never glued to the top surface of the belt • All components in our conveyors are produced on state-of-the-art manufacturing equipment Multiple cleat sizes and styles available See page 81 Step 5 for options Corrugated sides available with 1 inch cleats • Patent-pending Z TrackTM is a unique design of the angle idler assembly that offers users a way to gain control over belt tracking at the angles of incline or decline • Z TrackTM adjusts rapidly for belt installation and tracking adjustments at the angles of incline or decline and locks in the tracking setting to ensure long-term performance • Z TrackTM components are precision manufactured and produced as a pressed, sealed-for-life assembly that is well-guarded to avoid dangerous pinch points at the angles of incline or decline Tail Assembly Drive Assembly Z Track Conveyor • •