125 Series Corrosion Resistant Conveyors - QC Industries - #2

Text version of the page

QC Industries 513.753.6000 45 Features & Benefits Conveyor • Low profile design provides tight product transfers and the ability to fit into space-constrained areas • Single piece 10-gauge stainless steel framework is laser cut and formed to create a single-body frame construction, ensuring frame integrity • Tight tolerance belting and our unique snap-out sealed tail assembly provide for a quick belt change (less than 5 minutes) that is normally achieved without having to remove the drive packages or side rails • Corrosion resistant construction is achieved by replacing steel components with stainless steel or electroless nickel plated components to help prevent or minimize rust. Bearings are filled with food grade grease instead of standard grease. Anodized aluminum is used on some surfaces as well as on many of our side and guide rail profiles • High tensile strength belts offer superior strength-to-weight ratio and are available in over 50 various types • All components in our conveyors are produced on state-of-the-art manufacturing equipment Tail Pulley Assembly Drive Assembly • Single point belt tension is achieved through a snap-in eccentric tail assembly designed to pull through the natural elongation characteristics of the belt and provide quick and easy belt change capacity • Crowned sealed tail assembly is designed to promote excellent belt tracking and is equipped with superior needle bearings with seals that are filled with food grade grease • Thrust washers designed into the tail assembly provide axial float, which allows the assembly to move with the natural camber of the belt and protect bearings against off-center load conditions • Grease fitting design in the tail assembly allows for lubrication of bearings while the conveyor is running, resulting in zero down time during lubrication • Precision bearing alignment is guaranteed within the pressed tail assembly, providing optimal conditions to move the heaviest loads in low profile conveyors • Eccentric tracking bushing allows for single point tracking control at the idler end of the conveyor • Straight knurl design used to prevent premature wear on the carcass of the belt and still provide superior grip to overcome start-up inertia • Crowned sealed drive assembly designed to promote superior belt tracking, and is equipped with superior needle bearings with seals that are filled with food grade grease • Thrust washers designed into the drive assembly provide axial float, which allows the assembly to move with the natural camber of the belt and protect bearings against offcenter load conditions • Discreet needle fitting lubrication points in each bearing housing allows for lubrication of bearings while the conveyor is running, resulting in zero down time during lubrication • Precision bearing alignment is guaranteed within the pressed bearing assemblies that are piloted on body fitted studs, providing optimal conditions to move the heaviest loads in low profile conveyors • Threaded tracking adjustment points provide simple responsive belt tracking that retain settings, even during belt removal • Drive pulley available in solid output design or dual output design