125 Series Belt Conveyors - QC Industries - #36

Text version of the page

QC Industries 513.753.6000 43 90O Transfer Plate Conveyor Width Part No. 125-0220-02 125-0220-03 125-0220-04 125-0220-06 125-0220-08 125-0220-10 125-0220-12 125-0220-18 125-0220-24 2 in. 3 in. 4 in. 6 in. 8 in. 10 in. 12 in. 18 in. 24 in. Conveyor Width Part No. 125-0230-02 125-0230-03 125-0230-04 125-0230-06 125-0230-08 125-0230-10 125-0230-12 125-0230-18 125-0230-24 2 in. 3 in. 4 in. 6 in. 8 in. 10 in. 12 in. 18 in. 24 in. Notes: Transfer plates are not intended for use with high friction or cleated belts. Discharge conveyor must be pushing. Customer to drill screw holes to mount plate. Inline Transfer Plate Note: Transfer plates are not intended for use with high friction or cleated belts. Adjustable Diverters To Order: Part No. 125-0250-000 Adjustable Stops To Order: 1. Select an adjustable stop for 1” sides, 2” sides, or single tee slot (See pages 22 -24) 2. Using the chart below, fill in the part number using the nominal width of the conveyor for the last two digits of the part number Example: 125-0232-04 End Stop for a 4” wide conveyor that has 1” aluminum side rails with wear strip Note: The pivot mount attaches to the tail end of the conveyor and enables a pivot point from which other devices can lift the conveyor. Includes left and right hand mount. Pivot Mount Set Note: The rolling nosebar can be used with a conveyor running less than 60 fpm and carrying less than 5 lbs. per inch of conveyor width. Custom Rolling Nosebars Note: The adjustable diverter comes with a 5’ piece of UHMW rail and (2) mounting assemblies that the user can utilize to help orient the product around a 90O transfer. To Order: Part No. 125-0172-00 To Order: Please denote an ‘SAF’ in the belt portion of the conveyor part number, and an ‘R’ for the tail pulley part of the conveyor part number. Example: 1ESBH04-048-ASR-SAF 1” Sides 2” Sides Single Tee Slot 125-0232-WW 125-0234-WW 125-0233-WW Part No. Automation Accessories