125 Series Belt Conveyors - QC Industries - #29

Text version of the page

Note: This arrangement allows for the drive to be mounted on either side of the conveyor with the motor perpendicular to the drive pulley. Reference the drawings to the left for dimensional information. Reference the tables to the right for mounting package and gearmotor ordering information. The box immediately left shows the possible drive positions. 1.34 A * B DIA.* .87 3.89 4.14 1.77 B DIA. * .48 Top Drive B DIA.* 3.50 .38 1.37 A * 9.50 1.75 1.86 5.68 ** B DIA. * .50 DIA. 3.75 2.88 A * .44 DIA. 1.12 2.75 1.74 B DIA. * 2.88 B DIA. * QC Industries 513.753.6000 125 Series Heavy Duty Drives 36 Note: This arrangement allows for the drive to be mounted away from the conveyor and on either side of the conveyor, with the motor perpendicular to the drive pulley. Reference the drawings to the left for dimensional information. Reference the tables to the right for mounting package and gearmotor ordering information. The box immediately left shows the possible drive positions. Note: This arrangement allows for the drive to be mounted above the conveyor belt, on either side of the conveyor, and with the motor perpendicular to the drive pulley. Reference the drawings to the left for dimensional information. Reference the tables to the right for mounting package and gearmotor ordering information. The box immediately left shows the possible drive positions. Drive Location 1-J 1-J 3-G 3-G Drive Location 1-J 1-J 3-G 3-G Drive Location 1-G 1-G 3-J 3-J Front View Top View Front View Top View Front View Top View Remote Drive *For “A” and “B” dimensions, see table at bottom of page B DIA.* A * 1.37 .38 3.50 9.50 1.75 .33 1.86 5.30 B DIA. * Note: This arrangement allows for the drive to be mounted below the conveyor belt, on either side of the conveyor, and with the motor perpendicular to the drive pulley. Reference the drawings to the left for dimensional information. Reference the tables to the right for mounting package and gearmotor ordering information. The box immediately left shows the possible drive positions. Drive Location 1-G 1-G 3-J 3-J Front View Top View Bottom Drive A B 161 11.39 5.20 163 11.26 4.69 16V 8.22 4.98 251 9.22 5.19 253 9.25 5.20 25V 9.15 4.99 331 9.01 6.20 333 9.24 5.20 33V 10.11 5.01 501 13.85 6.15 503 13.22 6.19 50V 15.84 4.98 503 (ID) 14.08 7.23 The motor can be rotated in 90O Motor Dimension Chart increments when attaching it to the gearbox. This allows the user flexibility when deciding where the motor capacitor and work box will be located. *For “A” and “B” dimensions, see table at bottom of page *For “A” and “B” dimensions, see table at bottom of page **Dimension reflects use of MAA belt. See pages 20-21. *For “A” and “B” dimensions, see table at bottom of page Side Drive Note: 56 frame gear motors extend below gear box mounting plate and may require shimming