125 Series Belt Conveyors - QC Industries - #19

Text version of the page

QC Industries 513.753.6000 125 Series Mounts 26 Standard Mounts To Order: Frame Mounted version attaches directly to the conveyor frame. The frame has mounting holes every 3”. The Tee Slot mounted version attaches to 1” side rails, 2” side rails, the single tee slot and the multi tee slot. See page 22 & 24. Part No. 125-0181-01 (Tee Slot)* Part No. 125-0181-04 (Frame)* Part No. 125-0181-05 (For use with multi-tier stand)* Notes: Brackets are universal and can work on either side of the conveyor. Frame mounted brackets can only be used with 1” high or lower cleats. Tee Slot mounted brackets can only be used with 1/2” high or lower cleats. W + 1.71 W + 1.09 MAX. W + .57 MIN. 1.25 .135 W + 1.46 3.06 .22 DIA. .34 DIA. 1.32 .88 .59 .31 3.50 .38 SLOT 1.32 1.15 .41 .13 2.06 * Universal Raised Side Mount W + 1.46 W + 1.71 W + 1.09 MAX. W + .57 MIN. .135 1.25 .22 DIA. .34 DIA. 3.50 .38 SLOT 4.81 3.07 .88 .59 .31 3.10 1.53 .13 5.28 * To Order: Frame Mounted version attaches directly to the conveyor frame. The frame has mounting holes every 3”. The Tee Slot mounted version attaches to 1” side rails, 2” side rails, the single tee slot and the multi tee slot. See page 22 & 24. Part No. 125-0182-01 (Tee Slot)* Part No. 125-0182-04 (Frame)* Notes: Brackets are universal and can work on either side of the conveyor. Universal raised side mounts work with all cleat heights. Tee Mount Notes: Brackets are universal and can work on either side of the conveyor. Can also be used at tail end of conveyor in conjunction with drive end mounts (125-0014-00, 125-0013-00, and 125-0015-00). Cannot be used with cleated belts. To Order: Attaches directly to the conveyor frame. The frame has mounting holes every 3”. Part No. 125-0010-00* 5/16 DIA. THRU HOLE .135 W + 2.00 W + 1.37 2.04 * 1.56 4.00 3.00 .66 .22 1.00 1.60 Universal Bottom Mount Notes: Bottom mount can attach conveyor to a horizontal or vertical surface. Cannot be used with high adhesion or cleated belts. 5/16-18 SET SCREW .257 DIA. THRU HOLE 11/32 DIA. 2.89 * W - 1.50 W + 1.50 W - .75 W + 1.00 .43 .63 1.25 .16 .84 To Order: Attaches directly to the underside of the conveyor frame. To order, use the part number below and fill in the nominal conveyor width in inches for the last two digits. Part No. 125-0011-WW * Universal Adjustable Side Mount 125-0182-04 pictured *Part No. denotes one bracket and necessary hardware *Part No. denotes one bracket and necessary hardware *Part No. denotes one bracket and necessary hardware *Part No. denotes one bracket and necessary hardware Example: 125-0011-04* Universal Bottom mount for a 4” wide conveyor 125-0181-04 pictured *Dimension reflects use of MAA belt. See pages 20-21.