| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | PUR JE FIRST FOR PURE WATER | | |
| | | PRESTIGEDESCALE 1000 - 6000 LITRES PER DAY UNIT DESIGN 5um pre-filter - Protects reverse osmosis (RO) membrane from fouling by particulates and colloidal contaminants found in mains water. Integral tank - Protects against feedwater pressure fluctuations and allows easy cleaning. Integral boost pump - Enables RO membranes to operate at optimum performance | | |
| | | |
| | | RO membrane - Removes up to 98% of dissolved minerals, and up to 99% of organic, bacterial and particulate contaminants. Automatic membrane concentrate flush - Extends membrane life. Permeate divert - Ensures consistent permeate quality. Product control selection - Allows continuous running or control via external tank level sensors. | | |
| | | |
| | | |
| | | PD50 | | PD100 | | PD150 | | PD250 | | |
| | | |
| | | Technical Data | | |
| | | |
| | | | | | | | | | | | | | Output | @25°C (l/hr) | 70 | I46 | 29I | 430 | | | | | @I0°C (l/hr) | 42 | 84 | I68 | 250 | | | | Feedwater Hardness (Max)1 | ppm CaCO3 | 20 | 20 | 20 | 20 | | | | Feedwater Temperature (Min/Max) | °C | I / 35 | I / 35 | I / 35 | I / 35 | | | | Feedwater Pressure (Min/Max) | bar | 2 / 6 | 2 / 6 | 2 / 6 | 2 / 6 | | | | Free Chlorine | ppm Cl2 | <0.I | <0.I | <0.I | <0.I | | | | Optional Pretreatment Cylinder2 | | AC7 | AC7 | AC8 | AC8 | | | | Pure water recovery | Max (%) | 66 | 66 | 66 | 66 | | | | Feedwater consumption | Max (l/hr) | I06 | 22I | 44I | 65I | | | | Drain flowrate | Max (l/hr) | 36 | 75 | I50 | 22I | | | | Power requirements | | I00-230v/50-60hz | I00-230v/50-60hz | I00-230v/50-60hz | I00-230v/50-60hz | | | | Dimensions (w,d, h) | mm | 420x548x860 | 420x548x860 | 420x548x860 | 420x548x860 | | | | Weight (Working) | kg | 64 | 64 | 66 | 66 | | | | Weight (Shipping) | kg | 54 | 54 | 56 | 56 | | | | | | | | | | | | | |
| | | |
| | | 2 Optional pre-treatment required if free chlorine >0.lppm or feedwater has a fouling index >5. \--The units are designed for a maximum TDS of 1000 mg/I, sized on a water temperature of 10 °C and a maximum colloidal index of 3. The permeate recovery depends on the raw water quality and the type of pre-treatment. Errors and omissions excluded. Purite reserves the right to change specification without notice. | | |
| | | J | | |
| | | |
| | | |
| | | OTHER PURITE SOLUTIONS | | |
| | | |
| | | PRIMARY WATER PURE WATER ULTRA-PURE WATER SYSTEMS | | SERVICE | | EXCHANG | | |
| | | |
| | | These systems economically | | In addition to the Primary Water | | Further purification of Pure Water systems results in Type I water producing a resistivity of 18.2MQ and TOC <1ppb. | | For larger applications, Purite can design, install and project manage bespoke solutions for a variety of flows and water quality requirements. | | A range of preventative maintenance contracts covering all Purite and OEM equipment is available. | | This simple to manage solution produces pure water in larger, easy to dispense volumes. | | |
| | | |
| | | produce high quality systems these units | | |
| | | |
| | | water to grade III with significant reductions in ionic contaminants. | | further purify the water to Grade I and better. | | |
| | | | |
| | | |
| | | |
| | | |
| | | SS0006-01 | | |
| | | |
| | | INVESTOR IN PEOPLE | | |
| | | |
| | | 1 | | |
| | | Purite Limited, Bandet Way, Thame, Oxon OX9 3SJ, UK. Tel: +44 (0)1844 217141 Fax: +44 (0)1844 218098 Email: mail@purite.com Web site: www.purite.com | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |