Elite Combi 20C - 350C - PURITE - #2

/ 2


catalogue search
P. 01
P. 02
Pages:


See other catalogues for PURITE

Text version of the page
PURITE
FIRST FOR PURE WATER
Unit completely wired and pre-assembled and ready for installation.
Puritron 500 microprocessor control system for fully
automated monitoring and control of the reverse osmosis unit
with two-digit alphanumeric display LCD of permeate
conductivity, forced stop and full tank.
Alarm signals: low pressure, hard water and high
conductivity.
LEDs for operation and disinfection. Input (low voltage) for level control with 1 or 2 float switches, hardness monitoring unit. The Puritron 500 controller includes control functions for the hardness monitoring unit, shut-downs by external alarm signal (forced stop, regeneration).
During the regeneration cycle of the water softener, no permeate is produced. The softeners of the types 20 and 40 combi are timer-controlled, the types 80 through 350 combi are water meter controlled. The integral system makes piping of the individual components at site unnecessary.
ELITECOMBI Reverse Osmosis Units 20 combi - 350 combi
UNIT DESIGN
Stainless steel base frame with plastic front panel to house the instruments and controls.
Prefilter, polypropylene with 20 um filter cartridge and 2 pressure gauges. Softener, compact design.
Special inlet filter, polypropylene with 5 um filter cartridge and 2 pressure gauges.
High pressure pump, rotary-vane type. High performance wound module(s), with PA/PS composite membranes in GRP pressure vessel(s) with PP inliner. Valves and instruments including solenoid inlet valve, feedwater pressure switch, permeate and concentrate flow meter, vibration-resistant pressure gauges for pump and concentrate pressure, stainless steel valves for adjustment of permeate, concentrate and concentrate recirculation flow. Microprocessor control system as described below, connecting cable (3 m).
20 combi 40 combi 80 combi 150 combi 350 combi
Technical Data
PERMEATE FLOW RATE
l/h
17
42
83
166
332
MIN. SALT REJECTION
%
97
97
97
97
97
MAX. RECOVERY
%
75
75
75
75
75
VOLTAGE
V/Hz
230/50
230/50
230/50
230/50
230/50
MOTOR POWER
kW
0.3
0.3
0.55
0.55
0.55
FEEDWATER CONNECTION
DN
20
20
20
20
20
PERMEATE/CONCENTRATE
CONNECTION
DN
10/50
10/50
10/50
10/50
10/50
MIN./MAX. FEEDWATER
PRESSURE
bar
3/6
3/6
3/6
3/6
3/6
MIN./MAX. FEEDWATER
TEMPERATURE
°C
5/35
5/35
5/35
5/35
5/35
CAPACITY OF SOFTENER m3 BASED ON 200PPM TOTAL HARDNESS AS CaCO3
5.4
5.4
10.7
10.7
10.7
SALT STORAGE
kg
75
75
60
60
60
HEIGHT
mm
1650
1650
1650
1650
1650
WIDTH
mm
730
730
730
730
730
DEPTH
mm
700
700
700
700
700
WEIGHT APPROX
kg
125
130
135
140
155
V
J
The units are designed for a maximum TDS of 1000 mg/I, sized on a water temperature of 10 °C and a maximum colloidal index of 3. Under these conditions, the units still reach design permeate flow after three years of operation. With new units the working presssure is about 15% lower. The permeate recovery depends on the raw water quality and the type of pretreatment.
Errors and omissions excluded. Purite reserves the right to change specification without notice.
SS0004-01
INVESTOR IN PEOPLE
1
Purite Limited, Bandet Way, Thame, Oxon OX9 3SJ, UK. Tel: +44 (0)1844 217141 Fax: +44 (0)1844 218098 Email: mail@purite.com Web site: www.purite.com
j4v

pageCatalog pdf di En 2012-05-22-31