Text version of the page

Technical Specification: Pulsar point 800 Series float switches

800-20 Pump Master – Pump Switch

A most versatile, mechanically activated wide angle pump switch, notsensitive to turbulence. Controls pump control panels or control pumps directly up to 1.35kW at 115V ACand 2.59kW at 230V AC. Maximum continuous current 13 AMPS, maximum starting current 85 AMPS. Pump up and pump down or SPDT versions. Available with cable weight option. The float is 7.75cm dia x 9cm and is manufactured from PCV. Adjustablepumping range from 18cm to 91cm.

800-50 Micro Master – Pump Switch

A low cost mechanically activatedpump switch designed for use in turbulent conditions. Controls pumps up to 10 AMPSat 115V AC, 8 AMPS at 230V AC. Pump up, pump down or SPDT versions. The float is 7cm dia x 12.3cm and is manufactured from high impact resistantpolyropylene. Adjustable pumping range from 20cm to 91cm.

800-60 Sensor Float – Control Switch

A mercury activated , narrow angle control switch designed to accuratelyactivate pump control panels and alarms. There is a smaller version for operation in confined spaces. Switches currents of up to 5 AMPS AC. Switch operating range typically ±1cm from horizontal. Pump up, pumpdown or SPDT versions are available with the pipe clamp, integral weight (notSPDT) or cable options. The float is 8.6cm dia x 11.6cm and is manufactured from PVC.

800-70 Signal Master – Control Switch

A low cost, mechanically activated narrow angle control switch designed toaccurately activate pump control panels and alarms. Switches currents of up to 5 AMPS AC. Switch operating range typically ±4cm from horizontal. Pump up, pumpdown or SPDT versions are all available with pipe clamp or cable weight options. The float is 7.2cm dia x 8.7cm and is manufactured from high impact resistant polypropylene housing.
Cable tie Cable weight pumping range 10cm min tether length Our policy is one of constant development and improvement. Pulsar reserve the right to amend details as necessary. Represented by Pulsar Process Measurement LtdOak HouseBromyard RoadWorcester, EnglandWR2 5HP Telephone: +44 (0)870 6039 112 Fax: +44 (0)870 6039 114 E-mail: info@pulsar-pm.com Web site: http://www.pulsar-pm.com