Text version of the page

Physical:

Weight: nominal 0.5kg - Enclosure: ABS base with polycarbonate lid, flammability rating UL94HB. Cable entries:3xM20 nylon cable glands suitable for 6-12mm cable.

Environmental:

IPrating: IP67 - max/min temperature (electronics): -20°- +45°C

Performance:

Accuracy: 0.25% of measured range or 6mm (whichever is greater). Resolution: 0.1% of the measured range or 2mm (whichever is greater). Range: dependent on transducer, 125 mm to 25 m.

Set up:

Via software on CD supplied or hand held programmer or CSO log software Programming security: via passcode (user selectable) Programmed data integrity: via non-volatile RAM

Power Supply: Fuses:

DC 10-28v. 4W maximum power (typically 2w) Self-resetting internal DC fuse

Software:

Programming software for application set-up via RS232 connection to a computer is included with Level CSO units. Optional CSO log software is required for data logging applications and enables programming of and data acquisition from Level CSO units, together with charting facilities. All chosen logged data is tagged with date and time information. Aconnection lead is required.

Outputs:

Analogue: 0-5Vdc into minimum load 10K non-isolated (user programmable and adjustable, resolution 0.1%. Serial: RS232.

Wake-up period:

Wake-up typically 2.5 – 4 seconds, depending on the transducer in use. May be polled by external data-logger or telemetry outstation.

Logging Capacity:

256KB. Total logged period is dependent on the amount of information required to be data logged. Examples: monitoring level and temperature every 15 minutes, memory capacity 569 days. Monitoring level, temperature and echo strength every 5 minutes, memory capacity 163 days.

Approvals:

May be used with the Pulsar standard range of transducers approved to ATEX EExm for Zone 1 or optional EExia for Zone 0, see separate specification sheet TS 009 5/01.
Pulsar Process Measurement Limited operates a policy of constant development and improvement and reserve the rightto amend technical details as necessary Pulsar Process Measurement Ltd, Oak House, Bromyard Road, Worcester, England, WR2 5HPTel: +44 (0) 870 6039 112 Fax: +44 (0) 870 6039 114www.pulsar-pm.com Pulsar Inc., PO Box 800, Shalimar, Florida 32579, USATel: +1 850 609 1777 Fax: +1 850 651 4777www.pulsar-us.com