video corpo

Portable Facing Units - XP Series - SERCO
9Pages

{{requestButtons}}

Catalog excerpts

Portable Facing Units - XP Series - SERCO - 1

SERCO XP-Series Portable Facing Units Branch Office USA 29340 Industrial Way # 402 Evergreen CO 80439| USA Phone : +1 (303) 955-4862 Fax : +1 (303) 955-5904 contact@serco-usa.com www.serco-usa.com SERCO SAS Branch Office France Z.A du Meyrol 2 rue de l’Artisanat

Open the catalog to page 1
Portable Facing Units - XP Series - SERCO - 2

Valves --- Flanges Repair and Maintenance OF SEALING SURFACES ON-SITE OR IN THE WORKSHOP APPLICATIONS ULTIMATE TECHNOLOGICAL SOLUTIONS Standard and custom-built portable EQUIPMENT The SERCO XP machining units are designed for the repair and maintenance of virtually all dimensions and materials of many diverse components such as: 1Flanges 1Grooves 1Safety valves ■ Sealing surfaces ■ Hole surfaces ■ High pressure valves 1Flat seats 1Conical seats 1Manholes ■ RTJ Grooves Used in many diverse and demanding industries: ■ Power Plant (Nuclear, Thermal, Hydraulic) 1Refineries ■...

Open the catalog to page 2
Portable Facing Units - XP Series - SERCO - 3

40 YEARS OF EXPERIENCE AND TECHNICAL EXPERTISE WORLDWIDE PROVIDING THE INDUSTRY WITH THE MOST VERSATILE AND RELIABLE FLANGE AND VALVE MACHINING TECHNOLOGY COST EFFECTIVE precision, High precision, High performance Enhanced efficiency Light weight Perfect for use in tight areas Operating principle The Serco XP machines all work on the same principle. They are set up and fixed in place by a column/arm system. This clamping principle allows high precision performance of internal machining operations. The XP machine setup is fast and easy. The design allows for independent adjustment of the...

Open the catalog to page 3
Portable Facing Units - XP Series - SERCO - 4

FUTURE OF ON SITE MACHINING Inclinable Head The inclinable head is designed to do boring operations, RTJ grooves and conical machining. It attaches to the end of a fixing arm. The results are extremely accurate and precise. wv. The FSTG allows all the XP series to outside of a flange in order to mach AND the bolt working surface. be clamped on the ne the seal surface Using the inside of the holes to catch the flange, the FSTG avoids any distortion during the set-up of the machine. The gasket surface will not be deformed even after removal of the machine. All the machines can be used with a...

Open the catalog to page 4
Portable Facing Units - XP Series - SERCO - 5

ADVANTAGES Precision With a precision of 1/100 mm and a surface finish up to Ra 1.6 the Serco XP machines are the best performing and most accurate machines available to perform your surfacing operations. In some fields of activity (Petroleum, refineries, Offshore, etc.), the seal surface’s required roughness varies between Ra 3.2 & 6.3. Thanks to the adjustable radial feed, SERCO machines are able to accommodate different demands and standards. Fast Setup The machine is designed to be set up quickly and easily even in the most severe working conditions. Since the column height and the...

Open the catalog to page 5
Portable Facing Units - XP Series - SERCO - 6

Portable boring and surfacing machines Portable equipment for conical machining Portable grinding equipment Portable grooving bench Ring Type Joint (RTJ) Flanges: Ring Type Joint flanges are generally used in high pressure and/or high temperature operations for oil and gas applications. The Serco machining units are specially designed for dependable, high performance machining in extreme conditions. 6/9 Subject to modification without prior notice

Open the catalog to page 6
Portable Facing Units - XP Series - SERCO - 7

XP SERIES TECHNICAL FEATURES Radial auto-feed ( 2 speeds ) Driving motor maxi power in Watt with 6 bar (87 psi) Driving motor free speed in revolution/min Weight (approximately) Outside clamping system Inclinable head (boring operation, RTJ Groove, conical machining)

Open the catalog to page 7
Portable Facing Units - XP Series - SERCO - 8

I Radial stroke in mm Radial auto-feed ( 2 speeds ) Mini facing 0 Maxi facing 0 Mini clamping 0 Maxi clamping 0 Driving motor maxi power in Watt with 6 bar (87 psi) Driving motor free speed in revolution/min Working air pressure Weight (approximately) Outside clamping system Inclinable head (boring operation, RTJ Groove, conical machining) Subject to modification without prior notice

Open the catalog to page 8
Portable Facing Units - XP Series - SERCO - 9

Contact & Comments Our commitment! Your satisfaction! Serving our customers around the world with competence, efficiency and reliable service is our main goal. Whatever questions you may have, please do not hesitate to consult with us. Our staff will always advise you in a professional manner and recommend the right equipment to meet your technical requirements. Call or email us for more information! 2 Rue de l’Artisanat ZA du Meyrol 26200 Montélimar| FR Phone: +33 (0) 4 7501 4298 Fax: +33 (0) 4 7501 7962 contact@serco-tools.com www.serco-tools.com 9/9 Subject to modification without prior...

Open the catalog to page 9

All PROTEM catalogs and technical brochures

  1. Boring Bar

    1 Pages

  2. Serco SBM1

    4 Pages