Catalogue - GENERAL LEAFLET - PROTEM - (Version JPG)

See other catalogues for PROTEM

Cutting machine, Deburring machine, Pipe beveling machine, Tool, Facing tool

Text version of the page

TYPE SM8

PIPE BEVELING MACHINE

■ The air powered SM 8 mini-beveler is a rugged portable weld-end preparation tool. It will perform repeatable qualityweld preps on most metal pipes and tubes including stainless steel, from 8 mm I.D. to 32 mm O.D. The cutting head will bevel, face and counterbore individually or in a synchronized operation.

■ The SM 8 is easy to install on all pipes and completely torque accepting (requires no holding device for machining].

■ The Protem SM 8 unit requires only33 mm total clearance thereby allowing precise machining within very restricted working areas.

TECHNICAL SPECIFICATIONS


	Standard Mandrel I.D. clamping capacity	8 to 30.5 mm I.D.
	Machining range	All pipe and tube sizes from 8 mm I.D. to 32 mm O.D.
	Tool feed	Manual handwheel, 10 mm travel
	Weight	Complete unit 2.5 kg
	Motor drive	0.5 HP - 6 bars - 500 l/mn off-load speed: 600 rpm nominal speed: 300 rpm
	Cutting head gear drive	off-load speed: 120 rpm nominal speed: 60 rpm
	Tooling	Facing, 30 and 37°30' bevel, counterbore, J-bevel (All other angles available on request]
	Mandrels	Various socket rods, socket holders, expansion sockets are available according to diameters to perform
	Optional equipment	Miling head

DIMENSIONS

A CUT ABOVE THE REST

GENERAL LEAFLET - PROTEM - #3

Cutting machine, Deburring machine, Pipe beveling machine, Tool, Facing tool