| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | LVS/PVS- CURRENT SENSING | | |
| | | |
| | | How LVS/PVS Shunts Will Benefit You: SMD current-sensing....................................to 15 amperes Ohmic/voltage drop tolerances.......................to ±0.005% Values......................................... from 1 miliohmto 100KQ TCR Char...............................15ppm(Std.) to 0±10ppm/°C Temperature Span..........................-65 to +275°C (@ 1%) (For closer tolerance see Derating Curve (Fig. 3)) | | |
| | | W I L I |b|b| W L I c |c| TT | | |
| | | TypeLVS H TypePVS | | |
| | | |
| | | H | | |
| | | |
| | | |
| | | |
| | | ELECTRICAL & PHYSICAL SPECIFICATIONS PAD LAYOUT | | |
| | | Std. Min. Res. @ Max. Watts | | |
| | | DIMENSIONS ± .787 MM (.031") | | |
| | | |
| | | Max. Res. (Q) | | |
| | | Max. Watt Amp | | |
| | | |
| | | |
| | | H mm ins. | | L mm ins. | | W mm ins. | | b mm ins. | | d mm ins. | | |
| | | a mm ins. | | | c mm ins. | | | e mm ins. | | |
| | | e | | |
| | | |
| | | Special Min. Res. @ Derated Watts | | |
| | | |
| | | d | | | |
| | | |
| | | |
| | | |
| | | 1W 3A | | 3.30 | | 9.14 | | 3.18 | | 1.91 | | 1.91 | | |
| | | 2.54 | | 6.60 | | |
| | | .111Q @1W .001Í2 @.009W | | |
| | | PVS1 | | |
| | | PVS1 | | |
| | | 5K | | |
| | | | |
| | | |
| | | |
| | | .130" | | .360" | | .125" | | .075" | | .075" | | |
| | | .100" | | .260" | | |
| | | | |
| | | |
| | | |
| | | |
| | | 4.90 .193" | | 3.81 .150" | | |
| | | .03£2 @ 2W | | |
| | | LVS2 PVS2 | | | 100 | | |
| | | |
| | | |
| | | 2W 8A | | |
| | | 6.35 | | 9.78 | | 5.72 | | 3.18 | | 2.84 | | 2.54 .100" | | |
| | | |
| | | |
| | | | |
| | | |
| | | .250" | | .385" | | .225" | | .125" | | .112" | | |
| | | 7.87 .310" | | |
| | | |
| | | |
| | | .00m @ 0.064W | | |
| | | 15K | | |
| | | |
| | | |
| | | |
| | | |
| | | 6.99 .275" | | 4.70 .185" | | |
| | | .013Í2 @3W | | |
| | | 100 | | |
| | | LVS3 PVS3 | | |
| | | |
| | | |
| | | 6.35 | | 12.7 | | 6.35 | | 2.54 | | 2.84 | | 2.54 .100" | | |
| | | 3W 15A | | |
| | | |
| | | |
| | | .250" | | .500" | | .250" | | .100" | | .112" | | |
| | | 10.8 .425" | | |
| | | |
| | | |
| | | .00m @ 0.225W | | |
| | | 50K | | |
| | | |
| | | | |
| | | |
| | | LVS5 | | |
| | | 8.08 .318" | | |
| | | 6.10 .240" | | |
| | | .022Í2 @ 5W | | |
| | | 100 | | |
| | | LVS5 | | |
| | | |
| | | |
| | | |
| | | |
| | | 7.87 .310" | | 15.88 .625" | | 7.87 .310" | | 1.91 .075" | | 2.84 .112" | | 2.54 .100" | | |
| | | 5W 15A | | | |
| | | |
| | | PVS5 | | |
| | | 14.0 .551" | | |
| | | | |
| | | .00m @0.22W | | |
| | | 100K | | |
| | | PVS5 | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | For types: HVS1, PRC100T, PTS1, PVS1 & ST35 4 mm - -. --,_[ J | | |
| | | ENGINEERING DATA: 1 RESISTANCE AND TOLERANCES You can select any ohmic value or decimal part of an ohm from 0.001 Q to 100KQ with microhm/microvolt accuracies to ±0.005% see Fig. 2, p.7. PRC's unique "single-joint" design on the four (4) terminal parts makes tab identification academic. 2. TCR CHARACTERISTICS 0±15 ppm/°C.(std.) Please specify temperature span of operation. Add LTC in the part # for TCR 0±10ppm/°C. to+150°C. 3. STABILITY VS. TIME to ±0.001%/yr. at 25°C. (no load) 4. PRECISION POWER Standard Min. Res. @ Max. Watts -are based upon ±1% resistance tolerances at 25°C. (please see end column above). Derating is required for higher temperatures, closer tolerances and lower resistance values -please see Fig. # 3, on page 7. | | |
| | | 5j PROTECTIVE SEAL Rectangular solvent-resistant epoxy case offers excellent thermal transfer to base. 6_ TERMINALS Solderable "hot-tinned" pure copper (ETP/OFHC) tab terminals and low EMF construction reduces thermal effects usually associated with low value resistors. 7 SMT "Carrier Tape" PACKAGING ' per IEC 286-3 (EIA 481): Please see Purchasing Information on pg 3. | | |
| | | |
| | | 8 Pitch | | |
| | | 24 mm (.945"W) 1 | | |
| | | |
| | | |
| | | 24 mm Tape | | |
| | | |
| | | For types: HVS2, HVS3, LVS2, LVS3, PTS2, PTS3, PVS2, & PVS3 | | |
| | | |
| | | il | | |
| | | 4mm | | |
| | | |
| | | Tí | | |
| | | |
| | | |
| | | 24 mm (.945"W) | | |
| | | 12 Pitch | | |
| | | |
| | | |
| | | |
| | | 24 mm Tape | | |
| | | 4" I.D. 1"Wide 12.750" O.D. . „ ...__. See Note | | |
| | | |
| | | For types: LVS5, PVS5 & HVS5 | | |
| | | |
| | | |
| | | 12 Pitch | | |
| | | 32mm(1.260"W) | | |
| | | |
| | | |
| | | 1/2" Dia. Hole 1 Optional Form Note: Skin packed to board with polyfilm | | |
| | | 32 mm Tape | | |
| | | |
| | | |
| | | |
| | | PRECISION RESISTOR CO., INC. 10601 75TH Street North, Largo, Florida 33777-1421 U.S.A. Tel: 727-541-5771 Fax: 727-546-9515 Email: prc@precisionresistor.com Web Site: http://www.precisionresistor.com | | |
| | | 6 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |