PRECILEC – 6 avenue des Andes – Bâtiment n°5 – 91940 Les Ulis – France Phone + 33 169 80 67 04 – Fax + 33 169 80 67 08 - www.precilec.com – precilec@zodiac.com

RCI444R FS

Incremental Optical Encoder with RE0 444 Tacho Flange

RADIO-ENERGIE optical incremental encoders are designed for accurately measuring speed and position of rotating shafts in industrial environment: machine tools, packing machines manufacturer, motor drives … They use a differential optical and ratio metric principle to minimize temperature and photodiode aging effects. Their universal complementary push-pull output interface and their large supply voltage range make them very easy to connect to most of electronic control units with high noise immunity.

Main features

Shaft type Full shaft Ø 7 and 11 mm Housing diameter 115 mm Fixation Standard RE0 444 flange Body Aluminium Shaft Stainless steel Pulses per turn 1024 or 2048 as standard. All others upon request. Output signals A & B with gated Z Termination M23 connector 12 pins - Cable - Junction box – MS310 connector 10 pins Operating T° range - 25°C / + 85°C

Electrical characteristics

Supply voltage 4,5 to 30V dc Output signals Universal complementary push-pull (short circuit protected, 7272) RS422 compatible with 5 V supply voltage Max output frequency 300 kHz Max load current 20mA max per channel EMC According to EN 61000-6-2 and EN 61000-6-4

Connections

Cable UL M23 – Junction - 8 wires CW MS310 box Output waveforms A white 5 A 3 A / yellow 6 H 6 B blue 8 B 4 B / orange 1 I 7 Z green 3 C 5
Seenfrom the Z / brown 4 J 8
shaft Vcc (+) red 12 D 2 Gnd (-) black 10 F 1 Ground case Drain 9 G

Mechanical characteristics

Max continuous speed 10 000 min
-1 Starting torque 0.5 N.cm Shaft Inertia 70 gr.cm
2 Weight 700 gr. Protection IP 65 (IEC 60529) and IP64 at shaft end Max shock 30 gr, 11 ms (IEC 68-2-27) Max vibrations 10 gr, 10-2000 Hz (IEC 68-2-6)
D-0408 1/4