Pistol air srewdrivers 15 C - Powertools Sweden - #6

0,6 + 2,2 0,4 + 3,5 0,4 + 4,5 0,4 + 5,0

0,6 + 2,2 0,4 + 3,5 0,4 + 4,5 0,4 + 5,0

15 = Power of the motor in Watt/10 • C = Screwdriver • 2 = Maximum tightening torque in Nm • A = Air shut-off system • P = Pistol Grip • PA = "forward" pistol grip

• The figures shown are measured at a pressure of 6,3 bar (ISC 2787), the recommended operating pressure

• The tightening torque values have been measured in accordance with ISC 5393 standard.

• Noise level has been measured in accordance with ISC 3744 and ISC 15744 standards.

^Additional factor: 3 dBA spread in method and production (ISC 15744).

• Vibrations level have been measured in accordance with ISC 8662-1

and ISC 8662-7 standards.

• Accessory drive: female hexagonal drive 1/4", 6,35 mm (ISC 1173)

• The code number must be used when ordering

The data given in the table are indicative and can be changed without prior notice. The torque values are purely indicative and may be influenced by the softness of the type of joint, by the type and length of the screw, by the pressure and quantity of air supply, and by the type of accessory used. The values indicated for noise and vibration levels were obtained in the laboratory, performing tests that comply with the standards stated, but alone are not sufficient for calculating risks. Values measured in the single work places may be higher than those stated. The values of actual exposure and consequent risks are specific and depend on the operator's method of work, the type of work piece and the work place, as well as the operator's time of exposure and his physical conditions. Fiam cannot be held responsible for any consequences deriving from the use of the information in the table when evaluating risks in the work place over which Fiam has no control. For all further details, please apply to the Fiam Technical Consultancy Service.

Reversibility: all models are suitable for tightening and untightening operation

a CO

E

a

a

>

FIAM PRODUCTS ONLY USE QUALITY COMPONENTS

Viale Crispi 123 - 36100 Vicenza - Italy

Tel. +39.0444.385000 - Fax +39.0444.385002

www.fiamairtools.com