Air srewdrivers 15C - Powertools Sweden - (Version JPG) - Page n° 6 - PDF Catalogue | Technical Documentation

See other catalogues for Powertools Sweden

Pneumatic screwdriver, Tapping machine, Pneumatic grinder, Impact wrench, Drill

Text version of the page

Tightening torque on soft joint


	Model	Code 1
	15C2A	112514372
	15C3A	112514373
	15C4A	112514374
	15C5A	112514375
	15C2AL	112514382
	15C3AL	112514383
	15C4AL	112514384
	15C5AL	112514385


r.p.m.	Type	Type 1	kg	0xl	l/s	Drive	dBA	m/sec.²
2000	\|4	o	0,58	38x230	4,0	Of 1/4''	73	< 2,5
1400	\l	o	0,59	38x230	5,5	Of 1/4''	73	< 2,5
950	\l	o	0,59	38x230	5,5	Of 1/4''	73	< 2,5
650	\l	u	0,59	38x230	5,5	Of 1/4''	73	< 2,5
2000		Ü	0,59	38x228	4,0	Of 1/4''	73	< 2,5
1400		o	0,60	38x228	5,5	Of 1/4''	73	< 2,5
950		o	0,60	38x228	5,5	Of 1/4''	73	< 2,5
650		o	0,60	38x228	5,5	Of 1/4''	73	< 2,5

0,4 + 2,0 0,4 + 3,5 0,4 + 4,5 0,4 + 5,0

15 = Power of the motor in Watt/10 • C = Screwdriver • 2 = Maximum tightening torque in Nm • A = Air shut-off system • L = Lever

• The figures shown are measured at a pressure of 6,3 bar (ISO 2787), the recommended operating pressure

• The tightening torque values have been measured in accordance with ISO 5393 standard.

• Noise level has been measured in accordance with ISO 3744 and

ISO 15744 standards.

_*Additional factor: 3 dBA spread in method and production (ISO 15744).

• Vibrations level have been measured in accordance with SO 8662-1 and ISO 8662-7 standards.

• Accessory drive: female hexagonal drive 1/4", 6,35 mm (ISO 1173)

• The code number must be used when ordering.

The data given in the table are indicative and can be changed without prior notice. The torque values are purely indicative and may be influenced by the softness of the type of joint, by the type and length of the screw, by the pressure and quantity of air supply, and by the type of accessory used. The values indicated for noise and vibration levels were obtained in the laboratory, performing tests that comply with the standards stated, but alone are not sufficient for calculating risks. Values measured in the single work places may be higher than those stated. The values of actual exposure and consequent risks are specific and depend on the operator's method of work, the type of work piece and the work place, as well as the operator's time of exposure and his physical conditions. Fiam cannot be held responsible for any consequences deriving from the use of the information in the table when evaluating risks in the work place over which Fiam has no control. For all further details, please apply to the Fiam Technical Assistance Service.

Reversibility: all models are suitable for tightening and untightening operation

j| Push start I Lever start

a CO

/ Other technical features

' Clutch spring 'TRACS 2

/ Assembled on the tool Igrey colour - 0 wire 3,2 mm ' Code 595103202

/ Supplied /black colour- 0 wire 2,2 mm I Code 595102204

Model

Tightening torque on soft joint

15C2... 15C3... 15C4... 15C5...

0,8 + 2 0,8 + 3,5 0,8 + 4,5 0,8 + 5

0,4 + 1,3 0,4 + 1,3 0,4 + 1,3 0,4 + 1,3

Model

Air inlet

Recommended hose bore

0 5 mm

15C...

1/4'' gas

E >

Û) 15C

air screwdrivers are designed for use with lubricated and unlubncated compressed air


Standard equipment (supplied with the tool)	Accessories available upon request	Models available upon request
• Clutch adjustment key • Additional clutch spring • Hanging ring • Use and maintenance manual • Eco-friendly packaging	• Bits, sockets,etc., balancers, exhaust silencers and other compressed air system accessories: (see Accessories catalogue) • Collar bracket for arm stands (code 692039006)	• Lever models for left hand operators • Models with bigger anti-slip collar • Models with only right hand rotation • Models with only left hand rotation • Straight models with lever + push start • Models for double insert bits Please apply to the Fiam Technical Assistance Service

FIAM PRODUCTS ONLY USE QUALITY COMPONENTS

Fiam Utensili Pneumatici Spa

Viale Crispi 123 - 36100 Vicenza - Italy

Phone +39.0444.385000 - Fax +39.0444.385002

customerservice@fiamairtools.com

Air srewdrivers 15C - Powertools Sweden - #6

Pneumatic screwdriver, Tapping machine, Pneumatic grinder, Impact wrench, Drill