EUDA series
28Pages

{{requestButtons}}

Catalog excerpts

EUDA series - 1

PANEL DEVICE SERVICE

Open the catalog to page 1
EUDA series - 3

About Portwel Portwell, Inc. was founded in 1993 and entered the Industrial PC market in 1995 by developing single-board computers. Today, our continuous development of leading-edge products has resulted in strong growth in market share and revenue, a firm place on theTaipei stock exchange (TAISDAQ), and has estab- lished Portwell a major Worldwide supplier of specialty Computing application platforms and services. Portwell, Inc. is not only a member of the selected group of Intel® Applied Computing Platform Providers (IACPP), but also an associate member of Intel® Embedded and...

Open the catalog to page 3
EUDA series - 4

Certification of CE/FCC Class B The EUDA Panel PC sries have been fully tested, compliant with the technical standards of FCC Part 15 Class B (DoC), ICICES-003 and CE EMC Directive 2004/108/EC (EN55022 / EN55024). Class B device, which is suitable for use anywhere (including the home), must pass more stringent tests than Class A. EUDA has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Class B indicates that the device's radio frequency (RF) missions are very low so that they do not interf驨re with other device Thse limits of...

Open the catalog to page 4
EUDA series - 5

t5 a; portwcll lab has its own dust-probf and water-proof device to fulfill the panel pc requirelient of ip65 at the r&d's design stage and thus easier tq get approval from utsidc officiai lab. IP Code, Ingress Protection Rating, classifies the degrees of protection provided against the intrusion of solid objects, dust, accidentt contact, and water in electrical enclosures. First digit of IP The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects....

Open the catalog to page 5
EUDA series - 6

Rugged g su pportrve mtal plate on the t bendmg Addmg hooked design on the back cover to | enhance ftxirvg | Rugged on m镩tal housing, front bezel and back cover To meet harsh application environment, EUDA intensifies the design on the back cover of the mtal housing to prevent it from over-bending and from being intruded by foreign needle-shaped obiect through the screw holes of VESA-mount area. In terms of 'green' design, Aluminum is 100% recyclable with no downgrad-ing of its qualities. The re-melting of aluminum requires little energy, only about 5 percent of the energy required to...

Open the catalog to page 6
EUDA series - 7

Vibration & Shock Rsistance The vibration & shock tests simulate the products experiencing vibrations during transportation, installation, and usage environments. <UCDU) 3 CC The purpose of vibration test is to verify the products' ability to withstand the mechanical rsonance in 3 axis IX,Y and Z) and the purpose of shock test is to verify how rugged the design is in 3 axis (X,Y and Z). Any potentiel dam驭ages could corne up during thse testing conditions. Judging from the testing results, mechanical R&D engi-neers can adjust to enhance the design and make the product more reliable under...

Open the catalog to page 7
EUDA series - 8

Touch |_ Touch the Cloud through Cost-effective 5-Wire Rsistive Touch Screen The Rsistive Technology which can be activated by bare finger» gloved hand or stylus is applied on two layers with overlaying a hard-coated ITO on a conductive clear giass. Th驨se two layers are held apart by spacer dots. When the top flexible layer (PET film + Circuit-layer + ITO Conductive Coating) is compressed by a touch into contact with the bottom layer (ITO Conductive Coating + Circuit-layer + Glass or Acrylic panel) that is set on the stable glass, the voltage is detected and measured from same voltage...

Open the catalog to page 8
EUDA series - 9

1 Resistive-type touch screen O Film Epoay R«m FFC / FPC TO Glass lllustratlve cross-section of Resistive-type touch screen RΩfrence Spcification of 5-Wire R驩sistive Touch Screen butlt-in EUDA sries Tuuth type ^-Wire Arwlog Rsistive 5-Wirc Analoq R驩sistive 5-Wre Analoq Rsistive >-Wtre Analoq Rsistive G|a« Dimension ?61 x 199 8 mm 372x 245 5 mm 3S6x?86.5m 3934x31665 mm Viewing Area 1498 x 188.5 mm Kr9x2335mm 343 x 275 5 mm 3809x30565mm Active area 246 8x1805 m 103.5x227.5 mm 337x2695mm ُ77.3 x 302 05 mm Thickness 2.20 +-0.2 mm 2.20 + - 0.2 mm 2 20 + -02 mm 2.20 +-02 mm Transparency 80%+ -3%...

Open the catalog to page 9
EUDA series - 11

The most suitable substitute model for MMI / HMI with design of refinement. Just touch the edge and corner to feel it. By leveraging Intel low power technology, EUDA sries makes the depth of industrial panel solution within 68mm (with only 28mm thickness in IPC chas-sis). Both rugged and slim Panel PC solution must be the first choice of the replacement of old HMl/MMI built in factory machine or of the limited installation or maintenance space. EUDA is not as buiky as traditional PPC, it is rugged but stylish design, refined edges without cutting burr. 667mm 魕 Compact 60 ~ 68mm in thickness...

Open the catalog to page 11
EUDA series - 12

Fan-free The EUDA PPC is not only Fanless on built-in mini-ITX board, but also Fan-free in the System. From the platform dcision, component slection, board placement to thermal design, ail of the key factors are taken into consid驩ration with care. The advantages to phase in EUDA are... No more worry a bout ■ Excessive power consumption. ■ Reliability of fans. ■ Noise, dirt, aging and less effective of fans. ■ Disaster of fan failure due to wear of bearings, dirt dposition or clog on the blades may resuit in System overheating. The MTBF of fans will never be constraint to customers' Panel PC...

Open the catalog to page 12
EUDA series - 13

Thermal Test Under the circumstances of the thermal and humid chamber can help test to discover the System tolrance in each spcifie operational environment. Electro-component has diff驩rent reaction towards operating environment. In certain case, diffͩrent temprature and humidity may cause malfunction, un-stability or even worse damage. With the environmental test chamber, products' reliability and endurance can be stimulated under the harsh conditions. It helps R&D engineers to debug according to the test resuit. PE's Cham魭ber Lab compiles with IEC68 rgulation, device is capable of...

Open the catalog to page 13

All PORTWELL catalogs and technical brochures

  1. PPM- C393

    2 Pages

  2. PEM-E200VLA

    1 Pages

  3. PQ7- M106IE

    2 Pages

  4. PCOM-B634VG

    2 Pages

  5. Power Supply

    8 Pages

  6. WEBS-21A0

    1 Pages

  7. WEBS-21B0

    1 Pages

  8. AREMO-4196

    3 Pages

  9. AREMO-2173P

    2 Pages

  10. PRC-1194

    1 Pages

  11. EZDRV-400

    1 Pages

  12. EZCool

    1 Pages

  13. DA-103

    1 Pages

  14. WEBS-3583

    2 Pages

  15. WEBS-2170

    1 Pages

  16. WEBS-5481-S

    1 Pages

  17. WEBS-5481

    2 Pages

  18. PCOM-B633VG

    1 Pages

  19. Arto-1070

    1 Pages

  20. PVR-1140

    1 Pages

  21. PVR-4450

    1 Pages

  22. PVS-1125

    1 Pages

  23. PVS-2422

    1 Pages

  24. PICMG1.0.

    2 Pages

  25. ROBO-6712VGA

    1 Pages

Archived catalogs