Filter Alarm Panel and SmartFilter Control Switch - Polylok - #1

The Polylok™ filter alarm panel and switch provides a visual/audio alarm to alert the home or business owner that the septic tank filter needs cleaning. This is an ongoing maintenance program on the septic system, it is the responsibility of the owner to call a service company for cleaning service.

The Polylok™ filter alarm switch activates when the filter cartridge is near capacity on solids that have built up through the filtering process. The filter alarm switch sends a signal to the alarm panel activating the septic tank alarm. The owner will need to call for immediate service.

The system should be installed by a licensed, insured septic service company. The filter alarm switch is inserted into the top of the Polylok™ filter cartridge and the alarm wires are connected to the alarm panel wiring. All wiring is to conform to NEC wiring, state or local codes.

Enclosure: 6.5 x 4.5 x 3.0 inch (16.51 x 11.43 x 7.62 cm), indoor/outdoor, weatherproof, thermoplastic Horn: 82 decibels at 10 feet (3 meters) Electrical: 120 VAC, 50/60Hz, 7 watts max. (alarm condition)

VRS control switch with magnetically-

activated reed switch

Control Differential: .375 inches (1 cm)

Maximum Angle from Vertical: 5°

Cable: 10 feet (3 meters), flexible 18

gauge, 2 conductor SJOW (UL,CSA),

water-resistant (CPE)

Housing and Float: 1.60 inch diameter x

6.7 inch long (4.06 cm x 17.01 cm), high

impact, corrosion resistant PVC for use in

sewage and non-potable water up to

120°F (50°C)

250 mAmps, 12-125 VAC, 50/60 Hz 500 mAmps, 6-12 VDC

J Complete package includes standard VRS control switch with 10 feet (3 meters) of cable, indoor/outdoor alarm panel, and an effluent filter

J Alarm panel features manual alarm test switch and horn silence switch

J Alarm horn rated 82 decibels at 10 feet (3 meters)

J Direct interface of control switch and effluent filter insures proper

placement of switch J Three-year limited warranty