Catalogues - uv8-vacuum-pump

Catalogue UV8 vacuum pump

www.pneumofore.com

Page

/ 1

Manufacturer's
contact details

Pneumofore - 91452, 149351, 92893, 89849, 135287, 89068, 331275, 14292

/ 1

See other catalogues for Pneumofore

Text version of the page

^Dneumofore

UV8

Primary Vacuum Pump

Since 1923 Pneumofore has designed and produced vacuum pumps suppliers featuring original solutions, the result of constant efforts in research and development.

The UV vacuum pumps manufacturer are easy to install, to operate fully automatically and represent the most simple and inexpensive solution for vacuum plants. UV pumps achieve a high degree of vacuum through a wide pressure range of practically constant flow. This allows performances equal to larger size pumps, with considerable energy savings. The success of the UV series vacuum pumps in many industrial applications is based on the low life cycle cost, safety, environmental compliance, low noise level, compactness, high performances, design simplicity, reliability and durability.

UV8

Components

Main Features

Intake industrial air filter with polyester cartridge (3 urn).

Coolant filtration cartridge for lubrication circuit.

Coolant industrial separator and coolant recovery for clean coolant-

free exhaust. Practically no coolant vapor with 1 mg/m³

of residual coolant, referred to ambient conditions.

Cylinder-integrated non return valve manufacturers.

Direct coupling between cylinder and electrical motor.

Soundproof cabin allows [69 dB(A)]

Fully automatic operation: automatic suction valve,

coolant temperature control, control switches, safety

vacuum gauge specifications, main switch, all on board.

Control front panel with ON / OFF switch, two lamps, hour-

meter, air-end temperature gauge, vacuum gauge, coolant

separator clogging pressure gauge specifications, inlet air professional filter clogging

check button, main breaker, emergency stop button.

Very low maintenance cost thanks to design simplicity

and to few moving parts subject to wear.

Vertical layout for space economy.

Electrical panel ready to interact with remote control

system.

Air cooling through an aluminum cooler and a temperature controlled fan.

"Closed-loop" lubrication circuit ensures negligible coolant consumption.

Single-stage suction volumes at 50 Hz of 462 m³/h.

Maximum vacuum degree 0,5 mbar(a).

Special aluminum alloy vanes provide active sealing

according to the traditional Pneumofore feature and

guarantee a stable performance even after decades of

operation, avoiding efficiency loss and minimizing cost

of operation and maintenance.

"Plug and play" pumps, easy to install and integrate.

Operation with professional frequency converter possible with max

range from 35 to 60 Hz.

Customization available on request : variable speed, second stage booster, etc.

Up to 5 years warranty with maintanance contract.

Applications :

• Vacuum coating.

• Impregnation.

• Heat treatements.

• Food packaging.


Technical data		50 Hz	60 Hz
Nominal capacity	m³/h	462	554
Residual pressure	mbar(a)	0,5
Pump motor	kW	11	13,5
Rotation speed	rpm	1460	1750
Fan motor	kW	0,1	0,12
Noise level	dB(A)	69	₇₀
Intake connection	DN	100
Exhaust connection	BSP	3"
Weight	kg	760
Dimensions (L x W x H)	mm	1350x655x1775

UV8 and UV8 BVSC2500B performance curves

UV8

UV8 BVSC2500B

0000

2500 1000

100

CG Q.

3000


		_M
	Pneumofore engineers help	n ■
	customers to design the most
	suitable vacuum system for any	I
	application and assist them during
	regular operation as well as long-term
	maintenance.	IPC
	UV8 BVSC2500B

1000

100

1000

0,01

0,05 0,1

Pressure [mbar(a)]

Pneumofore S.p.A Since 1923 • Manufacturers of air compressors and Vacuum Pumps • Plant Engineering • Worldwide Service

www.pneumofore.com ViaN.Bruno34, 10098 Rivoli(TO), ltaly-Tel:+39 011.950.40.30, Fax:+39 011.950.40.40-info@pneumofore.com

UNI EN 9001:2000 and IS0 14001: 2004

Pneumofore strives to constantly improve its products and reserves the right to modify technical data with no prior notification. Contents of this documents are for informational purposes onlyand do not constitute a guarantee extension of any kind. Trademark and logo Pneumofore ® are registered worldwide.