Catalogue - CB series - Pneumofore

Pneumofore

CB Series

Side Channel Blowers and Exhausters

Since 1923 Pneumofore has designed and produced

vacuum pumps and air compressors, featuring original solutions, the result of constant efforts in research and development.

The CB side channel blowers and exhausters are conceived to suck or to compress gases or nonexplosive mixtures. With the drive motor connected directly to the body and the absence of lubricants, these blowers are suitable for any industrial applications. The assembly is composed by single-block construction impellers splined directly to the drive shaft, an entirely die cast in aluminium and bearing on the front cover for a faster replacement.

The CB side channel blowers and exhausters are suitable for a wide range of applications to convey gases and air, at relatively high pressure, with high reliability and increased level of quietness when operating.


	Main Features	Components and Accessories
	• No maintenance. • No contamination of conveyed fluids. • Silent operation. • High capacities both on compression and depression. • High depression atteined. • Easy installation. • Reduced size and weight.	• Vacuum and pressure relief valves. • Vacuum and pressure regulating valves. • Single and double connection supplementary silencers. • Dry inlet filters. • Vacuum and pressure change over valves. • Check valves. • Suction pads and fittings. • Vacuum and pressure gauges. • Shock mounts for pumps. • Threaded and Pneurop connections.


	Applications
	• Pneumatic conveyors.	• Shaking of food products.
	• Water treatment plant.	• Bottle washing and filling machines.
	• Hot-dip galvanization baths.	• Packaging machines.
	• Oxygenization of aquariums and fisheries.	• Industrial vacuum cleaners.
	• Air feed to industrial ovens and burners.	• Dental instruments.
	• Printing machines.	• Chemical, pharmaceutical and photographic industries.
	• Nebulization and spraying of agricultural products.	• Glass manufacturing.
	• Fluidification of powders.	• Plastic material industries.


Model			Maximum flow		Maximum differential pressure		Installed Power		Noise Level		Overall Dimensions	Weight
			50 Hz 60 Hz		50 Hz 60 Hz		50 Hz 60 Hz		50 Hz 60 Hz		L x W x H mm	kg
			m³/h		hPa (mbar)		kW		dB(A)		L x W x H mm	kg
CBP06-MS		blowers	304	366	340	325	4.0	4.6	71.6	73.6	376x367x393	35.2
CBP06-MS	_	exhausters	304	366	270	325	4.0	4.6	70.6	72.6	376x367x393	35.2
CBP09-MD		blowers	311	375	650	560	7.5	8.7	77.5	79.5	492x660x561	81
CBP09-MD		exhausters	311	375	475	475	7.5	8.7	77.0	79.0	492x660x561	81
CBP08-TS		blowers	1007	1215	380	325	15.0	17.4	82.5	84.5	458x818x548	113
CBP08-TS		exhausters	1007	1215	325	325	15.0	17.4	81.1	83.1	458x818x548	113
CBP11-TD		blowers	903	1090	475	400	18.5	21.5	85.9	87.9	542x915x813	172
CBP11-TD		exhausters	903	1090	450	400	18.5	21.5	85.2	87.2	542x915x813	172
The above chart represents only a part of the 123 available models

Pneumofore SpA

www.pneumofore.com

Since 1923 • Air Compressors and Vacuum Pumps • Plant Engineering •Worldwide Service

Via N. Bruno 34, 10090 Rivoli (TO), Italy-Tel: +39 011.950.40.30, Fax: +39 011.950.40.40 - info@pneumofore.com

UNI EN 9001: 2000 and IS0 14001 certifiée

Pneumofore strives to constantly improve its products and reserves the right to modify technical data with no prior notification. Contents of this documents are for informational purposes onlyand do not constitute a guarantee extension of any kind. Trademark and logo Pneumofore ® are registered worldwide. Copyright © Pneumofore SpA All rights reserved. Any unauthorized reproduction or dissemination of this document is strictly prohibited.

6/73en - nov2006

CB series - Pneumofore - #1

Stainless steel pump, Side channel blower, Pump, Air compressor, Compressor