CONTROL
The MCC-2, phytron´s freely programmable
dual axis stepper motor controller, is a compact
stand-alone unit for 2 phase stepper
motors providing up to 3.5 APEAK phase current.
Controllers in the MCC series have many
inputs and outputs (digital and analog) and
encoder inputs for step position monitoring
plus possibilities to connect limit switches all
as standard.
Due to the viariety of available host interfaces
(Ethernet, Profibus, USB etc.), the MCC can
be quickly and easily integrated into existing
applications.
This controller is easy to program and can
operate either directly (remote) via its host
interface or stand-alone (local) with the program
routines stored within.
Applications
As a compact stand-alone device, it convinces
expecially in small experimental setups,
machines and equipment, which can be
dispensed in a PLC.
MCC-2
Programmable controller for two axes
• 2 axes stepper motor control unit with
integrated power stages
• Bipolar control of 2 phase stepper
motors
• Phase currents up to 3.5 APEAK
• Power supply 24 to 48 VDC
• Step resolution 1/1 up to 1/256 step
• Host interfaces: Ethernet, USB,
Profibus, RS 485 or RS 232
• Interfaces:
- 2 encoders
- 2 analogue inputs
- 8 digital inputs and 8 outputs
- 4 limit switches
- 2 redundant designed enable inputs
• Programming in well-tried MiniLog
format, acc. to DIN 66025 or in
LabVIEW®
• LabVIEW® driver for including the MCC
in your LabVIEW® project
• Remote or local mode
Stand-alone
IQ
Digital
Analogue El. Isolated
Integrated Driver
LabVIEW®
LabVIEW® is a simulation
software with
a graphical interface. Use the VIs (Virtual
Instruments) generated by phytron and
integrate them in your LabVIEW® project.
So you can easily control the MCC from your
usual programming environment.
MiniLog-Comm®
MiniLog-Comm® is phytron‘s communication
software running under Windows®
to facilitate programming of the
stepper motor controller. It provides
quick and easy generation of sequential
programs.
MiniLog-Comm®
software is delivered
free with phytron controllers and offers
additional functions for test mode,
step by step control or single sequence
command execution of a motor move, a
motor status window and even a Motion
Creator.
Highlights
Stand-alone
Once programmed the MCC-2
can work without additional
PC/controller.
Stand-alone
IQ
Profibus
As suggested by our customers
now with optional
Profibus interface!
LabVIEW®
In Focus
www.phytron.eu
ENG www.phytron.eu/MCC-2
