Free Programmable One-Axis Stepper Motor Control MCC-1 - PHYTRON - #1

Text version of the page

CONTROL The MCC-1, phytron‘s freely programmable dual axis stepper motor controller, is a compact stand-alone unit for 2 phase stepper motors providing up to 3.5 APEAK phase current. Controllers in the MCC series have many inputs and outputs (digital and analogue) and encoder inputs for step position monitoring plus possibilities to connect limit switches all as standard. Due to the viariety of available host interfaces (USB, Ethernet, Profibus etc.), the MCC can be quickly and easily integrated into existing applications. This controller is easy to program and can operate either directly (remote) via its bus or stand-alone (local) with the program routines stored within. Applications As a compact stand-alone device, it convinces expecially in small experimental setups, machines and equipment, which can be dispensed in a PLC. MCC-1 Programmable controller for one axis • 1 axis stepper motor control unit with integrated power stages • Bipolar control of 2 phase stepper motors • Phase currents up to 3.5 APEAK • Power supply 24 to 48 VDC • Step resolution 1/1 up to 1/256 step • Host interfaces: USB, Ethernet, Profibus, RS 485 or RS 232 • Interfaces: - 1 encoder - 1 analogue input - 8 bidirectional, digital inputs and outputs - 2 limit switches - 2 redundant designed enable inputs • Programming in well-tried MiniLog format, acc. to DIN 66025 or in LabVIEW® • LabVIEW® driver for including the MCC in your LabVIEW® project • Remote or local mode Stand-alone IQ Digital Analogue El. Isolated Integrated Driver In Focus LabVIEW® LabVIEW® is a simulation software with a graphical interface. Use the VIs (Virtual Instruments) generated by phytron and integrate them in your LabVIEW® project. So you can easily control the MCC from your usual programming environment. MiniLog-Comm® MiniLog-Comm® is phytron‘s communication software running under Windows® to facilitate programming of the stepper motor controller. It provides quick and easy generation of sequential programs. The MiniLog-Comm® software is delivered free with phytron controllers and offers additional functions for test mode, step by step control or single sequence command execution of a motor move, a motor status window and even a Motion Creator. Highlights Stand-alone Once programmed the MCC-1 can work without additional PC/controller. Stand-alone IQ All-in-one solution A compact device with controller, I/O and power stage by 55 x 127 x 110 mm LabVIEW® www.phytron.eu ENG www.phytron.eu/MCC-1