3-Axes Servo Motor Controller PhyMac-3 - PHYTRON - #1

Text version of the page

PhyMac-3 3-Axes Servo Motor Controller with Integrated Contouring Control Technical information Servo Controller PhyMac-3X and PhyMac-3XL Applications The ervomotor controllers PhyMac-3 T PhyMac-Comm software, which servo controller is availabe in two performance classes: PhyMac-3X: 115 to 230 VAC single-phase or 30 to 300 VDC with 5 Arms, PhyMac-3XL: 230 to 480 VAC three-phase or 30 to 300 VDC with 10 Arms. PhyMac-3X / 3XL s are the ideal electronic components for all applications with three axes. It unites three power stages and a contouring control all within a compact housing. can syncroneously control all rotating and linear servo motors with feedback in real time. Various interfaces provide a professional connection to the world of process control. he most frequent tasks are already included in the contouring control. This simplifies the programming with is based on LabVIEW, and saves time. The Fig. 1 T semiconductor industry and chip fabrication, packing and labeling machines, paper and printing industry, as well as in the food and beverage industry or in handling systems. Systems, used in the drive technology as e. g. Tripod, H-Bridge, Gantry System or Lift-Turn unit can quickly and precisely be realised by PhyMac-3. The Phytron synchronous servo motors type PSM can be directly connected to PhyMac-3. ypical applications are found, e. g., in the Power supply AC or DC CANopen bus PC Connection Ethernet PSM Servo motors Sensors (Encoder, Camera) I/O (PLC, tools, etc.) Further actuators 3-axes servo controller with integrated contouring control 2 performance classes: PhyMac-3X: 115 to 230 VAC single-phase or 30 to 300 VDC PhyMac-3XL: 230 to 480 VAC three-phase or 30 to 300 VDC Nominal output current: PhyMac-3X: 5 Arms PhyMac-3XL: 10 Arms Ethernet interface for monitoring and parametrization 8 digital inputs / 4 digital outputs, 3 of them with fast interrupt inputs CANopen port for real time operation RS 485 port (e. g. for smart camera) Encoder inputs according to RS 422 for belt drive sytems Free programmable optional interfaces (e. g. CAN) Feedback connectors: Resolver, Endat 2.1®, Sinus-Cosinus encoder or Hiperface® Programming with PhyMac-Comm SD-Card slot for transfer of application code Dimensions (HxWxD) in mm: PhyMac-3X: 249x160x225 PhyMac-3XL: 158x240x378 Designed for DIN rail mounting or wall mounting Optional: I/O extension to 12 inputs and 16 outputs PhyMac-3 / 08-1 GB