Piezo

•

Nano

•

Positioning

Accessories For the operation of PILine

® Piezo Actuators

RodDrives and piezo linearmotors, a special drive elec- tronics is—either integrated in the PI-controller or separate— required. The driver is neces-sary to create the ultrasonicoscillations of the piezoceramic actuator of the motor. The choice of the drive electronics depends on the application and the motion controller used and is therefore not part of delivery of a PILine

Nanopositioning & Scanning Systems Active Optics / Steering Mirrors Tutorial: Piezo- electrics in Positioning Capacitive Position sensors Piezo Drivers & Nano- positioning controllers Hexapods / Micropositioning
®

RodDrive. The driveelectronics, however, must be ordered at the same time as the drive, so that they can be tunedfor optimum performance witheach other.The products described in thisdocument are in part protected by the following patents: US-Patent No. 6,765,335

Photonics Alignment Solutions Industrial motion controllers Ceramic Linear motors & Stages Index
Dimensions of the M-674.00 RodDrive.

Technical Data

ModelsM-674.00UnitsTolerance Motion and positioning Travel range100mm Min. incremental motion0.05µmtyp.Max. velocity*400mm/s Mechanical properties Push-/pull force7N Self-locking7NMin. Drive Properties Drive type2 x PILine
® P-664Operating voltage (driver electronics)12V
Closed-Loop operation of a micropositioning stage with integrated RodDrive allows a Step- and settling performance of approx. 40 ms for a 1 mm step. Electrical power (driver electronics)15Wnominal Miscellaneous Operating temperature range-20 to +50°CMaterialAl (black anodized) Mass120g±5 % Cable length1.5m±10 mm Recommended controller/driverC-865, C-185
* The motion-values are typical values which can be reached in open-loop operation. It is important to follow the mounting guidelines. Constance of closed-loop velocity at 200 mm/s of an integrated M-674 RodDrive.

10 -1 to 10-28 see the Hardbound Catalog 10 a - 5