1 2 3 4 N-111 dimensions in mm Technical Data
ModelsN-111.30N-111.3ATolerance Active axesXX Motion and positioningTravel range5 mm5 mm Step size (in step mode)10 nm to 4 µm10 nm to 4 µm
Integrated sensor-
Linear encoder Sensor resolution-5 nm
Analog mode travel range2.5 µm2.5 µmMax. Open-loop resolution0.025 nm0.025 nmTyp.Closed-loop resolution-5 nm Step frequency100 Hz100 HzMax.Max. velocity0.2 mm/s*0.2 mm/s*Max. Mechanical properties
Stiffness in motion direction15 N/µm15 N/µm±20% Push / Pull force (active)50 N50 NMax.
Holding force (passive)80 N80 NMin. Drive propertiesDrive typeNEXLINE
® linear driveNEXLINE
® linear drive Operating voltage±250 V±250 VMiscellaneous Operating temperature range-40 to 80 °C-40 to 80 °C
MaterialAl (anodized), steelAl (anodized), steel Mass115 g135 g±5%Cable length1.5 m1.5 m±10 mm ConnectorSub-D NEXLINE
® connector, Sub-D NEXLINE
® connector, single-channelsingle-channel; sensor connectorRecommended controller / driverE-755.101:E-755.1A1
* The maximum speed in stepping mode is set so as to allow the greatest possible velocity constancy, so that no velocity fluctuations occur duringstepmotion. 9 9