PiezoMove Flexure Actuators - Physik Instrumente - #13

/ 24


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
Pages:


See other catalogues for Physik Instrumente

Text version of the page
Piezo • Nano • Positioning
Piezo Actuators
Nanopositioning & Scanning Systems
Active Optics / Steering Mirrors
Tutorial: Piezo-electrics in Positioning
Capacitive Position Sensors
Piezo Drivers & Nano-positioning Controllers
Hexapods/ Micropositioning
Photonics Alignment Solutions
Motion Controllers
Ceramic Linear Motors & Stages
Index
PICMA® piezo actuators (bottom curve) compared with conventional multilayer actuators with polymer insulation (top curve). PICMA® actuators are not affected by the high-humidity test conditions. Conventional piezo actuators exhibit increased leakage current after only a few hours. Leakage current is an indication of insulation quality and expected lifetime.
Test conditions: U = 100 VDC; T = 25 °C; Relative Humidity = 70%
The displacement of PICMA® actuators exhibits very low tempera­ture dependence. This, in combination with their low heat genera­tion, makes PICMA® actuators optimal for dynamic operation. (Operating frequency f = 200 Hz)
Recommended preload for dynamic operation 15 to 30 MPa
* For optional PTFE insulated wires, pigtail length 100 mm, change order number exten­sion to .x1 (e.g. P-882.11).
Unloaded (longitudinal) resonant frequency measured at 1 Vpp; capacitance at 1 Vpp,
1 kHz.
Standard PZT ceramic type:
PIC 252
Max. operating voltage: -20 to +120 V
Max. operating temperature: -40 to +150 °C
Standard Mechanical Interface: ceramic (top & bottom) Standard Electrical Interface: solderable pads
Available Options: strain gauge sensors, special mechanical interfaces, etc.
Other specifications on request. Specifications subject to change without notice.
Technical Data / Product Order Numbers
Order
Dimensions
Nominal
Max.
Blocking
Stiffness
Electrical
Resonant
number*
A x B x L
displacement
displacement
force
[N/Mm]
capacitance
frequency
[mm]
[Mm @ 100 V]
[Mm @ 120 V]
[N @ 120 V]
[MF] ±20%
[kHz] ±20%
P-882.10
2 x 3 x 9
6.5 ±20%
8 ±20%
190
24
0.13
135
P-882.20
2 x 3 x11
8.5 ±20%
10.5 ±20%
210
20
0.18
110
P-882.30
2 x 3 x 13.5
11 ±20%
13 ±20%
210
16
0.22
90
P-882.50
2 x 3 x 18
15 ±10%
18 ±10%
210
12
0.31
70
P-883.10
3 x 3 x 9
6.5 ±20%
8 ±20%
290
36
0.21
135
P-883.20
3 x 3 x 11
8.5 ±20%
10.5 ±20%
310
29
0.27
110
P-883.30
3 x 3 x 13.5
11 ±20%
13 ±20%
310
24
0.35
90
P-883.50
3 x 3 x 18
15 ±10%
18 ±10%
310
18
0.48
70
P-885.10
5 x 5 x 9
6.5 ±20%
8 ±20%
800
100
0.6
135
P-885.20
5 x 5 x 11
8.5 ±20%
10.5 ±20%
850
82
0.8
110
P-885.30
5 x 5 x 13.5
11 ±20%
13 ±20%
870
67
1.1
90
P-885.50
5 x 5 x 18
15 ±10%
18 ±10%
900
50
1.5
70
P-885.90
5 x 5 x 36
32 ±10%
38 ±10%
950
25
3.1
40
P-887.30
7 x 7 x 13.5
11 ±20%
13 ±20%
1700
130
2.2
90
P-887.50
7 x 7 x 18
15 ±10%
18 ±10%
1750
100
3.1
70
P-887.90
7 x 7 x 36
32 ±10%
38 ±10%
1850
50
6.4
40
P-888.30
10 x 10 x 13.5
11 ±20%
13 ±20%
3500
267
4.3
90
P-888.50
10 x 10 x 18
15 ±10%
18 ±10%
3600
200
6.0
70
P-888.90
10 x 10 x 36
32 ±10%
38 ±10%
3800
100
13.0
40
1

pageCatalog pdf di En 2012-02-07-15