| | | average current of 13 mA. The E-507.00 can be operated in two ways: I. Manual Control: The output voltage can be set by a 10-turn, DC-offset potentiometer in the range of -3 to -1000 Volts. II. External Control: Out-put voltage is controlled by an analog signal applied to the BNC input ranging from 0 to 11 Volts. Multiplying by the gain factor of -100, an output voltage range of -3 to -1100 Volts results. The DC-offset potentiometer adds a DC bias to the input, allowing continuous | | shifting of the input range between 0 V to +10 V and -10 V to 0 V (see page 6-52). For computer-controlled operation, an E-516.i3 20-bit DAC interface/display module can be used (requires E-500/ E-501 chassis). See graph for frequency response with selected HVPZTs. E-507.OE is the high current OEM version of E-507.00, especially designed for switching applications. It can output a peak-current of 400 mA for 5 msec. The E-507.OE is not equipped with a DC-offset potentiometer. E-507.36 is designed for systems or actuators requiring an operation voltage range of -250 V to +250 V, such as the P-363 PicoCube® (see page 2-72) or the P-111 - P-151 PicaShear™ actuators. | | |
| | | E-507.00 HVPZT Amplifier Module, -3 to -1100 V E-507.OE HVPZT Amplifier Module, OEM, 400 mA Peak Current E-507.36 HVPZT Amplifier Module, -250 to +250 V Ask about custom designs! | | |
| | | | | | | | | | | | Models | E-507.00 | E-507.OE | E-507.36 | | | | Function | | Power amplifier | Power amplifier | | | | Channels | 1 | 1 | 1 | | | | Maximum output power | 50 W (see page 6-52) | 400 W (see page 6-52) | 50 W (see page 6-52) | | | | Average output power | 13 W | 13 W | 13 W | | | | Peak output current <5 ms | 50 mA | 400 mA | 100 mA | | | | Average output current >5 ms | 12 mA | 12 mA | 24 mA | | | | Current limitation | Short-circuit proof | Short-circuit proof | Short-circuit proof | | | | Voltage gain | -100 ±1, +100 ±1 (selectable) | -100 ±1 | -50 ±1 | | | | Polarity | Negative/positive/bipolar (jumper selectable) | Negative | Bipolar | | | | Control input voltage | 0 to +11 V, 0 to -11 V (jumper selectable) | 0 to +11 V | -5 to +5 V | | | | Output voltage | -3 to -1100 V (-780 to +260, -550 to +550, -260 to +780, +3 to +1100 V, jumper selectable) | -3 to -1100 V | -250 to -250 V | | | | DC-offset setting | -3 to -1100 V at output with 10-turn pot. | - | 500 V range at output with 10 turn pot. | | | | Input impedance | 100 kQ | 100 kQ | 100 kQ | | | | Control input sockets | BNC | DIN 41612, 32 pin, rear; SMB, front | BNC | | | | PZT voltage output sockets | LEMO ERA.0A.250.CTL | LEMO ERA.0A.250.CTL | LEMO ERA.0A.250.CTL | | | | Dimensions | One 14T slot wide, 3H high | One 14T slot wide, 3H high | One 14T slot wide, 3H high | | | | Weight | 0.75 kg | 0.75 kg | 0.75 kg | | | | Operating voltage | Requires E-530/E-531 power supply | Requires E-530/E-531 power supply Requires E-530/E-531 power supply | | | | | (E-500/E-501 system) | (E-500/E-501 system) | (E-500/E-501 system) | | | | | | | | | | | | | | | |