Catalogues - piezo-ceramic-actuators-custom-subassemblies-pi-ceramic

Catalogue Piezo Ceramic Actuators & Custom Subassemblies (PI Ceramic)

www.pi.ws

Page

/ 56

Contact the
Manufacturer

Where to buy
this product ?

Request
a Quote

/ 56

See other catalogues for Physik Instrumente

Text version of the page

Full differential voltage control.

Pin assignment:

1: -30 V [or GND]

2: -30 V to +30 V [or 0 to 60 V]

3: +30 V [or +60 V]

Max. operating frequency should not exceed 30% of specified resonant frequency

Li.j I


Technical Data / Product Order Numbers
Order number* PL112.10**	Operating voltage [V] 0 - 60	Nominal * displacement [urn] ±20%** ±80	Free * length (Lf) [mm]** 12	Dimensions L x W x T [mm] 17.8 x 9.6 x 0.65	Blocking * force [N]** ±2.0	Electric capacitance [uF] ±20% 2 x 1.1	Resonant * frequency [Hz]** >1000
PL122.10	0 - 60	±250	22	25.0 x 9.6 x 0.65	±1.1	2 x 2.4	660
PL127.10	0 - 60	±450	27	31.0 x 9.6 x 0.65	±1.0	2 x 3.4	380
PL128.10**	0 - 60	±450	28	35.5 x 6.3 x 0.75	±0.5	2 x 1.2	360
PL140.10	0 - 60	±1000	40	45.0 x 11.0 x 0.60	±0.5	2 x 4.0	160

Operating temperature: -20 °C to + 85 °C (** max. 150 °C) Low temperature option available

Closed-loop option on request (strain-gauge-sensor)

Other specifications on request. Specifications subject to change without notice.

Capacitance measured at 1 Vpp , 1 kHz. Unloaded ("free bending") resonant frequency measured at 1 V_pp.

* For optional 100 mm wire leads change order number extension to .x1 (e.g. PL 112.11). *** All parameters depend on actual clamping conditions and applied load.

25 -