C-880
Options and Accessories
Technical Data C-880.R8 Power- Switch Card
ModelsC-880.R8 FunctionPower-switch card Channels8
Output power60 W Voltage per channel24 VCurrent per channel1 A
Pneumatic grabber gripper on an XZ micro-positioning combination for high precision pick-and-place applications. The C-880 controls both thestages (M-505.4PD, 100 mm horizontal travel and M-605.2DD,50 mm vertical travel) and the gripper with the C-880.R8 power-switch card. ModelsC-842.20 / C-842.40 FunctionDC servo-motor controller Channels2 / 4
Output power Analog H-bridge +/-12 V, 5 W per channel, 12-bit PWM output, 10 bit, 24.5 kHz for external ampli-fiers (ActiveDrive™)
Accessories for FlexibleAutomation
F-206.MC6
Encoder inputQuadrature encoder signals (single-ended
Interactive manual control pad.
This option allows easy manu-
al control of any 6 motorized
axes in the system using con-
trol knobs with programmable
step-sizes.
or differential mode), max. 10
-6 cts/sI/O PortsLimit and origin switches
To live up to its name of“Automation Controller,” a va-
riety of options and high-level
drivers are available for the C-880.
Servo characteristics32-bit programmable PID-ff filter Connectors2 x 15-pin D-sub on board2 x 15-pin D-sub on bracket holder (C-842.40) DimensionsPC card (ISA)
F-206.I3E F-206.iRU / F-206.00U
IEEE 488 interface card for
operation of one or more C-880s from a single PC. Photometer and A/D Cards.
These cards are equipped with
fiber-optic industrial connectors, infrared
or visible-light photodiodes
and amplifiers. Both have inte-
grated 12-bit A/D converterswith inputs accessible via aBNC socket on the card brack-
et.
Technical Data E-760 Piezo-Controller Card
ModelsE-760
C-880.R8
FunctionPower amplifier & sensor/position
servo control of P-611 NanoCube
® systems
Relay Board which can switch
power on up to 8 channels. The high-power capacity (24 V,1 A) can be used to directly
drive loads like industrial pneumatic valves, magnets, relays, etc.
Channels3 LVPZTMax. output power9 W Average output power3 W
Peak output current90 mA Average output current30 mAOutput voltage-20 to +120 V Sensor typeStrain gaugeServo characteristicsP-I (analog), notch filter Connector25-pin sub-D
DimensionsPC card (ISA)
© PI 1998-2005. Subject to change w/o notice. Cat 118 05/09.17 9-20