Text version of the page

Piezo

•

Nano

•

Positioning

Nanopositioning Controllers - 13949 E-760

NanoCube

®

Piezo Controller Card for F-206 / C-880 Controller

Ordering Information

Piezo Actuators E-760.3SV NanoCube
® Controller Card withAutomatic Alignment Functions,Vis. Detector Nanopositioning & Scanning Systems Active Optics / Steering Mirrors E-760.3Si NanoCube
® Controller Card withAutomatic Alignment Functions, IR Detector Tutorial: Piezo- electrics in Positioning Ask about custom designs! Capacitive Position Sensors
Piezo Drivers & Nano- positioning Controllers E-760 controller card with P-611.3SFNanoCube ® XYZ NanoPositioning system Hexapods / Micropositioning Photonics Alignment Solutions

Specially Designed for P-611 NanoCube

®

and F-206 HexAlign™ 6D Alignment System

Motion Controllers

Built-in Optical Metrology for Automatic Alignment 3 x 9 W Peak Power

Ceramic Linear Motors & Stages

Position Servo-Control

Index

The E-760 is a PZT amplifierand position servo-controllercard that was especiallydesigned for the P-611 Nano- Cube

®

XYZ NanoAlignmentsystem (see page 2-74 andpage 8-16). In addition to threelow-noise amplifiers and posi- tion servo-controller circuits, it is equipped with optical metro-logy and I/O for automatic alignment of photonics com- ponents. All functions areaccessible via the PC-bus inter-face. In addition, there is an analog input for position con- trol and an FC connector for the optical metrology.

Technical Data

ModelsE-760.3SV, E-760.3Si FunctionPower amplifier & sensor / position servo-control of P-611 NanoCube
® systems with additional optical metrology and I/O for automated alignment Channels3 Amplifier Maximum output power9 W / channel (see page 6-52) Average output power1 W / channel Peak output current <5 ms90 mA / channelAverage output current >5 ms8 mA / channel Current limitationShort-circuit proof Voltage gain10 ±0.1 PolarityPositiveControl input voltage-2 to +12 V Output voltage-20 to 120 VPZT voltage output socket25 pin sub-D Analog in/out socket8 pin network connector DimensionsPC Card (ISA) Position Servo-Control Sensor TypeStrain Gauge Servo CharacteristicsP-I (analog) + notch filterSensor socket25 pin sub-D (same as PZT voltage)
© PI 1998-2005. Subject to change w/o notice. Cat 118 05/09.17 Optical Metrology IR detector (E-760.3Si), Vis detector (E-760.3SV), input via FC connector

6-33