Text version of the page

E-500 – E-501

Modular Piezo Control Systems (HVPZT & LVPZT)

Configuration example: E-501 chassis with optional E-505 LVPZT amplifier, E-509.C1A piezo servo-controller for capacitive sensors and E-516.i3 20-bit DAC interface/display. Configuration example: E-500 chassis with three optional E-507 HVPZT amplifiers, E-509.L3 piezo servo-controller for LVDT sensors and E-516.i3 20-bit DAC interface/display.

For High- and Low-Voltage Piezo Systems

Ordering Information

19- and 9.5-Inch Chassis

E-500.00

Optional Position Servo-Control Modules

Piezo Amplifier & Position Servo- Controller, up to 3 Channels, Basic Chassis, 19” E-501.00

Optional Display and RS-232 & IEEE 488 Interface Module

Piezo Amplifier & Position Servo- Controller, up to 3 Channels, Basic Chassis, 9.5” Ask about custom designs!

ff. The E-500 is a modular, 19”rackmount chassis for piezoamplifiers and position servo- A more-compact 9.5-inch ver-sion of the system is available as the E-501. That chassis canhold one amplifier module (1-or 3-channel units available),one servo-control module (1- or 3-channel) and one dis- play/interface module (1- or 3-channel).E-500 and E-501 systems areassembled to order, tested, and, if a servo-controller is present, calibrated with the associated piezo mechanics. A modified E-500 chassis for upto 6 channels is available onrequest. For systems with up to 12 channels, the E-500.621 chassis with E-621 ampli- fier/controller modules can be used (see p. 6-36). controllers. An integratedmulti- function power supply (E-530.00) provides operatingvoltages for all available mod-ules including amplifiers, ser-vo-controllers, display and interface modules (see system configuration, p. 6-19

30-channel controller consistingof 3 E-500.621 chassis, each ofwhich can accomodate up to 12E-621 modules.

Technical Data

ModelsE-500.00E-501.00 Function19” chassis for piezo electronics: amplifier modules, 9.5” chassis for piezo electronics: amplifier modules,sensor modules, position servo-control modules,sensor modules, position servo-control modules, display/interface modulesdisplay/interface modules Channels1, 2, 3 1, 3 Dimensions450 x 132 x 296 mm + handles (see p. 6-10)236 x 132 x 296 mm + handles (see p. 6-10) Integrated power supplyE-530.00 E-531.00 Operating voltage90-264 VAC, 50-60 Hz, E-530.00 primary switching P/S; 90-120 / 220-264 VAC, 50-60 Hz, E-531.00 linear P/S
© PI 1998-2005. Subject to change w/o notice. Cat 118 05/09.17

6-18