Non-Contact Limit and OriginSwitches Non-contacting, Hall-effectlimit and direction sensing ori- gin switches are integrated into the motorized versions to pro-tect your equipment.All stages can be cross-stackedand combined with the M-125.90 Z-axis mounting bracket to provide multi-axis motion.

M-126

Notes

Translation stages with Crossed Roller bearings

Ordering Information M-126.CG1 Translation Stage, 25 mm, Compact dc motor / Gearhead M-126.DG1 Translation Stage, 25 mm, Dc motor / Gearhead M-126.PD1 Translation Stage, 25 mm, ActiveDrive ™ DC Motor (power supply included) M-126.PD2 Translation Stage, 20 mm ActiveDrive ™ DC-Motor Ball Screw(power supply included) M-126.CG1 translation stage with com-pact DC motor/gearhead See “Accessories”, page 7-92 ff.
M-126.2S1 for adapters, brackets, etc.
Translation Stage, 25 mm, 2-Phase Stepper motor manufacturer To 25 mm Travel Range
M-126.M0 Manual, DC-Servo and Stepper-Motor Drives
Translation Stage, 25 mm, Manual Drive, Leadscrew ActiveDrive
™ Option Compatible with Leading Industrial Motion controllers
M-125.90 Z-axis Mounting Bracket for VerticalMount of M-126 Stages Crossed Roller Bearings <0.1 µm Resolution
Ask about custom designs! XY and XYZ Combinations Direction-Sensing Origin Switch Non-Contact Limit Switches M-126 systems are high-resolu-tion translation stages withleadscrew and ballscrew drives.Precision crossed roller bear- ings guarantee straightness of travel of better than 2 µm. ActiveDrive™ M-126.PD1 and .PD2 areequipped with the high-perfo- mance ActiveDrive™. This novel design features a high-efficiency PWM servo-amplifiermounted side-by-side with theDC motor.The ActiveDrive™ providesseveral decisive advantages: All models are equipped with low-friction leadscrews for ex- cellent resolution and repeata- bility. Three motorized versions are available: M-126.CG1 utilizes a compact closed-loop DC motor with shaft-mountedhigh-resolution position encoder and a precision gear- head providing 0.1 µm mini- mum incremental motion, M-126.DG1 is equipped with a larger motor than M-126.CG1and provides higher velocity. Increased efficiency by elim- inating power losses between the amplifier and motor
M-126.2S1 dimensions (in mm) Reduced cost of ownership and improved reliability because no external driver isrequired Elimination of PWM amplifi- er noise radiation by mount-ing the amplifier and motor together in a single electri- cally shielded caseModel M-126.2S1 is equippedwith a micro-stepped 2-phase stepper motor.
M-126.CG1 dimensions (in mm) © PI 1998-2005. Subject to change w/o notice. Cat 118 05/09.17 7-40 7-40