| 0 ... 300 m ♦ 400 m ♦ CE ♦ 2 ♦ illuminated constantly: beam is interrupted, * flashes: reaching switching point, * off: sufficient stability control F1 = 25 kHz ♦ red, modulated light, < 1 mW * approx. 6 mm at 5 m, approx. 75 x 300 mm at 300 m vertical to housing axis * < 1 mrad * Emitter: 0.06 ° * Receiver: 5 ° * 50000 Lux * LED green * LED yellow: 1. LED lits constantly: signal > 2 x switching point (function reserve) * 2. LED flashes: signal between 1 x switching point and 2 x switching point * 3. LED off: signal < switching point sensitivity adjuster (Adjustment to < 25% of the effective operating range) , Light/dark professional switch * 10 ... 30 V DC * 11 , rated voltage < 250 VAC with degree of pollution 1-2 according to IEC 60664-1 * 10 % * Emitter: < 55 mA * Receiver: < 35 mA * emitter deactivation at +UB * 1 pnp transistor, short-circuit proof, protected from reverse polarity, open collector, Umax = 30 V DC, Imax = 0.2 A The output becomes inactive if the signal level has fallen below the function reserve for approx. 10 s (yellow and red LEDs flash). * If the light beam is interrupted four times during this period, the output immediately becomes inactive. light/dark ON, switchable * 2 pnp, antivalent, short-circuit proof, protected against reverse polarity , open collectors * max. 30 V DC * max. 200 mA * 1000 Hz * 0.5 ms * EN 60947-5-2 * -10 ... 50 °C (263 ... 323 K) * -20 ... 75 °C (253 ... 348 K) * IP67 * Plastic ABS * Plastic pane * 140 g (emitter and receiver) * |